CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
4 locks held by stty/766:
Move the scheduled code after the spinlock.
Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 14011183edfe..4ba164820904 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -829,12 +829,6 @@ static void stm32_usart_set_termios(struct uart_port *port,
cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
}
- /* Handle modem control interrupts */
- if (UART_ENABLE_MS(port, termios->c_cflag))
- stm32_usart_enable_ms(port);
- else
- stm32_usart_disable_ms(port);
-
usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
/*
@@ -916,6 +910,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Handle modem control interrupts */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ stm32_usart_enable_ms(port);
+ else
+ stm32_usart_disable_ms(port);
}
static const char *stm32_usart_type(struct uart_port *port)
--
2.17.1
