Re: [PATCH 5/5] USB: serial: ftdi_sio: add support for FreeCalypso DUART28C adapter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 01, 2020 at 07:54:10AM +0100, Jiri Slaby wrote:
> On 30. 11. 20, 16:37, Johan Hovold wrote:
> > --- a/drivers/usb/serial/ftdi_sio.c
> > +++ b/drivers/usb/serial/ftdi_sio.c
> ...
> > @@ -2386,6 +2393,21 @@ static int ftdi_stmclite_probe(struct usb_serial *serial)
> >   	return 0;
> >   }
> >   
> > +/*
> > + * FreeCalypso DUART28C is an FT2232D-based USB to dual UART adapter
> > + * with a special quirk: Channel B RTS and DTR outputs (BDBUS2 and BDBUS4
> > + * on the chip) have been repurposed to drive PWON and RESET controls.
> > + */
> > +static void ftdi_duart28c_setup(struct usb_serial_port *port)
> > +{
> > +	struct usb_serial *serial = port->serial;
> > +	struct usb_interface *intf = serial->interface;
> > +	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
> > +
> > +	if (ifnum == 1)
> > +		tty_port_set_nordy(&port->port, 1);
> 
> So s/1/true, provided the parameter is defined as bool now.

Also here I'm following the convention used for the other port-flag
helper which are used with numerical constants (just about) consistently
throughout the tree. 

Johan



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux