Re: [PATCH] serial: max310x: rework RX interrupt handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Wed, 30 Sep 2020 17:24:48 +0300
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:

> > On a Microchip SAMA5D3 platform that is receiving 20 bytes every 16ms
> > over one MAX310X UART, this patch has allowed to reduce the CPU
> > consumption of the interrupt handler thread from ~25% to 6-7%.  
> 
> Was it always like this?

As far as I can see, yes. I guess you were thinking about a Fixes: tag
perhaps? I don't think a Fixes: tag really applies here, as we're not
fixing a performance regression.

> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> > -       /* Configure MODE2 register & Reset FIFOs*/
> > -       val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
> > -       max310x_port_write(port, MAX310X_MODE2_REG, val);
> > +       /* Reset FIFOs*/  
> 
> Add a space before the asterisk.

Indeed. Let me know if a v2 is needed, or if this small typo can be
fixed when applying.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux