Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/23/20 9:43 PM, Arnd Bergmann wrote:
On Wed, Sep 23, 2020 at 5:43 PM Maximilian Luz <luzmaximilian@xxxxxxxxx> wrote:

On 9/23/20 5:30 PM, Arnd Bergmann wrote:
On Wed, Sep 23, 2020 at 5:15 PM Maximilian Luz <luzmaximilian@xxxxxxxxx> wrote:

Hello,

The Surface System Aggregator Module (we'll refer to it as Surface
Aggregator or SAM below) is an embedded controller (EC) found on various
Microsoft Surface devices. Specifically, all 4th and later generation
Surface devices, i.e. Surface Pro 4, Surface Book 1 and later, with the
exception of the Surface Go series and the Surface Duo. Notably, it
seems like this EC can also be found on the ARM-based Surface Pro X [1].

I think this should go to drivers/platform/x86 or drivers/platform/surface/
along with other laptop vendor specific code rather than drivers/misc/.

I initially had this under drivers/platform/x86. There are two main
reasons I changed that: First, I think it's a bit too big for
platform/x86 given that it basically introduces a new subsystem. At this
point it's really less of "a couple of odd devices here and there" and
more of a bus-type thing. Second, with the possibility of future support
for ARM devices (Pro X, Pro X 2 which is rumored to come out soon), I
thought that platform/x86 would not be a good fit.

I don't see that as a strong reason against it. As you write yourself, the
driver won't work on the arm machines without major changes anyway,
and even if it does, it fits much better with the rest of it.

Sorry, I should have written that a bit more clearly. I don't see any
reason why these drivers would not work on an ARM device such as the Pro
X right now, assuming that it boots via ACPI and the serial device it
loads against is fully functional.

The reason (at least as far as I know) it currently hasn't been tested
is that a) there aren't a lot of people around attempting to run Linux
on the currently only ARM device with that and b) it's currently blocked
by a reason unrelated to this driver itself, specifically that the
serial controller isn't being set up and thus the core driver doesn't
have a device it can attach to. My information may be outdated though
and is pretty much exclusively based on
https://github.com/Sonicadvance1/linux/issues/7.

If you are worried about the size of the directory,
drivers/platform/x86/surface/
would also work.

This was the alternative I'd have considered without ARM devices.

I'd be happy to move this to platform/surface though, if that's
considered a better fit and you're okay with me adding that. Would make
sense given that there's already a platform/chrome, which, as far as I
can tell, also seems to be mainly focused on EC support.

Yes, I think the main question is how much overlap you see functionally
between this driver and the others in drivers/platform/x86.

I think that the Pro X likely won't be the last ARM Surface device with
a SAM EC. Further, the subsystem is going to grow, and platform/x86
seems more like a collection of, if at all, loosely connected drivers,
which might give off the wrong impression. In my mind, this is just a
bit more comparable to platform/chrome than the rest of platform/x86. I
don't think I'm really qualified to make the decision on that though,
that's just my opinion.

Here's an overview of other drivers that I hopefully at some point get
in good enough shape, which are part of this subsystem/dependent on the
EC API introduced here:

- A device registry / device hub for devices that are connected to the
  EC but can't be detected via ACPI.

- A dedicated battery driver for 7th generation devices (where the
  battery isn't hanled via the ACPI shim).

- A driver properly handling clipboard detachment on the Surface Books.

- A driver for HID input/transport on the Surface Laptops and Surface
  Book 3.

- A driver for allowing users to set the performance/cooling mode via
  sysfs.

- Possibly a driver improving hot-plug handling of the discrete GPU in
  the Surface Book base.

And also some stuff that hasn't been written yet:

- A dedicated driver for temperature sensors handled via the EC on 7th
  generation devices (also handled via the ACPI shim on previous
  generations).

- Possibly a driver for real-time-clock access on 7th generation
  devices (it has yet to be tested if that interface is still
  around/required on those devices; that's also a thing handled via
  the ACPI shim on previous generations).

I doubt that those client drivers will be exclusive to x86, and I could
see (current and future) ARM devices using SAM based battery,
keyboard/HID, and performance mode drivers (which will likely also
require the device registry, because for some reason MS doesn't want to
describe those devices in ACPI on the newer generations any more...).
All of those should work as-is on ARM (or at least after the
corresponding device entries have been added to the device registry),
modulo bugs of course.

I hope this all gives a better overview of the form this may eventually
take on and helps you in your decision. I'd be completely happy to move
it to either, platform/surface or platform/x86/surface, whatever the
consensus is. I'd very much like to keep the client drivers all
contained to one sub-directory, though, and not scattered all over
platform/x86/surface_*.c. Again that's more of a personal preference
though :)

Thanks,
Max



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux