[RFC PATCH 2/9] surface_aggregator: Add control packet allocation chaching

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Surface Serial Hub communication is, in its core, packet based. Each
sequenced packet requires to be acknowledged, via an ACK-type control
packet. In case invalid data has been received by the driver, a NAK-type
(not-acknowledge/negative acknowledge) control packet is sent,
triggering retransmission.

Control packets are therefore a core communication primitive and used
frequently enough (with every sequenced packet transmission sent by the
embedded controller, including events and request responses) that it may
warrant caching their allocations to reduce possible memory
fragmentation.

Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
---
 drivers/misc/surface_aggregator/core.c        | 27 ++++++++++-
 .../surface_aggregator/ssh_packet_layer.c     | 47 +++++++++++++++----
 .../surface_aggregator/ssh_packet_layer.h     |  3 ++
 3 files changed, 67 insertions(+), 10 deletions(-)

diff --git a/drivers/misc/surface_aggregator/core.c b/drivers/misc/surface_aggregator/core.c
index e428aa59fcc3..938c46a9e20b 100644
--- a/drivers/misc/surface_aggregator/core.c
+++ b/drivers/misc/surface_aggregator/core.c
@@ -762,7 +762,32 @@ static struct serdev_device_driver ssam_serial_hub = {
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 };
-module_serdev_device_driver(ssam_serial_hub);
+
+
+/* -- Module setup. --------------------------------------------------------- */
+
+static int __init ssam_core_init(void)
+{
+	int status;
+
+	status = ssh_ctrl_packet_cache_init();
+	if (status)
+		return status;
+
+	status = serdev_device_driver_register(&ssam_serial_hub);
+	if (status)
+		ssh_ctrl_packet_cache_destroy();
+
+	return status;
+}
+module_init(ssam_core_init);
+
+static void __exit ssam_core_exit(void)
+{
+	serdev_device_driver_unregister(&ssam_serial_hub);
+	ssh_ctrl_packet_cache_destroy();
+}
+module_exit(ssam_core_exit);
 
 MODULE_AUTHOR("Maximilian Luz <luzmaximilian@xxxxxxxxx>");
 MODULE_DESCRIPTION("Subsystem and Surface Serial Hub driver for Surface System Aggregator Module");
diff --git a/drivers/misc/surface_aggregator/ssh_packet_layer.c b/drivers/misc/surface_aggregator/ssh_packet_layer.c
index fa1a3d1d4a49..993aabfdfdae 100644
--- a/drivers/misc/surface_aggregator/ssh_packet_layer.c
+++ b/drivers/misc/surface_aggregator/ssh_packet_layer.c
@@ -284,24 +284,53 @@ void ssh_packet_init(struct ssh_packet *packet, unsigned long type,
 }
 
 
+static struct kmem_cache *ssh_ctrl_packet_cache;
+
+/**
+ * ssh_ctrl_packet_cache_init() - Initialize the control packet cache.
+ */
+int ssh_ctrl_packet_cache_init(void)
+{
+	const unsigned int size = sizeof(struct ssh_packet) + SSH_MSG_LEN_CTRL;
+	const unsigned int align = __alignof__(struct ssh_packet);
+	struct kmem_cache *cache;
+
+	cache = kmem_cache_create("ssam_ctrl_packet", size, align, 0, NULL);
+	if (!cache)
+		return -ENOMEM;
+
+	ssh_ctrl_packet_cache = cache;
+	return 0;
+}
+
+/**
+ * ssh_ctrl_packet_cache_destroy() - Deinitialize the control packet cache.
+ */
+void ssh_ctrl_packet_cache_destroy(void)
+{
+	kmem_cache_destroy(ssh_ctrl_packet_cache);
+	ssh_ctrl_packet_cache = NULL;
+}
+
 /**
- * ssh_ctrl_packet_alloc() - Allocate control packet.
+ * ssh_ctrl_packet_alloc() - Allocate packet from control packet cache.
  * @packet: Where the pointer to the newly allocated packet should be stored.
  * @buffer: The buffer corresponding to this packet.
  * @flags:  Flags used for allocation.
  *
- * Allocates a packet and corresponding transport buffer. Sets the packet's
- * buffer reference to the allocated buffer. The packet must be freed via
- * ssh_ctrl_packet_free(), which will also free the corresponding buffer. The
- * corresponding buffer must not be freed separately. Intended to be used with
- * %ssh_ptl_ctrl_packet_ops as packet operations.
+ * Allocates a packet and corresponding transport buffer from the control
+ * packet cache. Sets the packet's buffer reference to the allocated buffer.
+ * The packet must be freed via ssh_ctrl_packet_free(), which will also free
+ * the corresponding buffer. The corresponding buffer must not be freed
+ * separately. Intended to be used with %ssh_ptl_ctrl_packet_ops as packet
+ * operations.
  *
  * Return: Returns zero on success, %-ENOMEM if the allocation failed.
  */
 static int ssh_ctrl_packet_alloc(struct ssh_packet **packet,
 				 struct ssam_span *buffer, gfp_t flags)
 {
-	*packet = kzalloc(sizeof(**packet) + SSH_MSG_LEN_CTRL, flags);
+	*packet = kmem_cache_alloc(ssh_ctrl_packet_cache, flags);
 	if (!*packet)
 		return -ENOMEM;
 
@@ -312,12 +341,12 @@ static int ssh_ctrl_packet_alloc(struct ssh_packet **packet,
 }
 
 /**
- * ssh_ctrl_packet_free() - Free control packet.
+ * ssh_ctrl_packet_free() - Free packet allocated from control packet cache.
  * @p: The packet to free.
  */
 static void ssh_ctrl_packet_free(struct ssh_packet *p)
 {
-	kfree(p);
+	kmem_cache_free(ssh_ctrl_packet_cache, p);
 }
 
 static const struct ssh_packet_ops ssh_ptl_ctrl_packet_ops = {
diff --git a/drivers/misc/surface_aggregator/ssh_packet_layer.h b/drivers/misc/surface_aggregator/ssh_packet_layer.h
index 51295cf48519..957dd3f1006c 100644
--- a/drivers/misc/surface_aggregator/ssh_packet_layer.h
+++ b/drivers/misc/surface_aggregator/ssh_packet_layer.h
@@ -164,4 +164,7 @@ void ssh_ptl_tx_wakeup(struct ssh_ptl *ptl);
 void ssh_packet_init(struct ssh_packet *packet, unsigned long type,
 		     u8 priority, const struct ssh_packet_ops *ops);
 
+int ssh_ctrl_packet_cache_init(void);
+void ssh_ctrl_packet_cache_destroy(void);
+
 #endif /* _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H */
-- 
2.28.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux