Re: [PATCH V6] serial: msm_geni_serial_console : Add Earlycon support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 22 Jun 03:08 PDT 2020, Akash Asthana wrote:

> From: Mukesh Kumar Savaliya <msavaliy@xxxxxxxxxxxxxx>
> 
> This change enables earlyconsole support as static driver for geni
> based UART. Kernel space UART console driver will be generic for
> console and other usecases of UART.
> 

Is this hardware different from the qcom,geni-debug-uart which we
already have EARLYCON support for?

Why is this a separate driver?

Regards,
Bjorn

> Signed-off-by: Mukesh Kumar Savaliya <msavaliy@xxxxxxxxxxxxxx>
> Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> ---
> Changes In V2:
>  - Fixed Makefile Typo issue.
> 
> Changes In V3:
>  - Removed mb() calls as *_relaxed() should take care.
> 
> Changes In V4:
>  - Minor change: space between offset and base addition.
> 
> Changes In V5:
>  - Removed unlikely() macro.
>  - root_freq() array taken as static.
>  - Removed extra readback of the register having no meaning.
> 
> Changes in V6:
>  - Drop SERIAL_MSM_GENI_HALF_SAMPLING config and support only
>    QUP HW ver > 2.5. As of now no device with QUP ver < 2.5 is using this
>    code for earlycon so it won't break them. I will post separate patch to
>    resolve this limitation.
> 
> Sending patch on behalf of Mukesh Savaliya.
> 
>  drivers/tty/serial/Kconfig                   |   7 +
>  drivers/tty/serial/Makefile                  |   1 +
>  drivers/tty/serial/msm_geni_serial_console.c | 480 +++++++++++++++++++++++++++
>  3 files changed, 488 insertions(+)
>  create mode 100644 drivers/tty/serial/msm_geni_serial_console.c
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 780908d..47caaa6 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -956,6 +956,13 @@ config SERIAL_MSM_CONSOLE
>  	select SERIAL_CORE_CONSOLE
>  	select SERIAL_EARLYCON
>  
> +config SERIAL_MSM_GENI_EARLY_CONSOLE
> +	bool "MSM on-chip GENI HW based early console support"
> +	select SERIAL_MSM_GENI_HALF_SAMPLING
> +	help
> +	  Serial early console driver for Qualcomm Technologies Inc's GENI
> +	  based QUP hardware.
> +
>  config SERIAL_QCOM_GENI
>  	tristate "QCOM on-chip GENI based serial port support"
>  	depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index d056ee6..7b6422e 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
>  obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
>  obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
>  obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
> +obj-$(CONFIG_SERIAL_MSM_GENI_EARLY_CONSOLE) += msm_geni_serial_console.o
>  obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o
>  obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
>  obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
> diff --git a/drivers/tty/serial/msm_geni_serial_console.c b/drivers/tty/serial/msm_geni_serial_console.c
> new file mode 100644
> index 0000000..80a7231
> --- /dev/null
> +++ b/drivers/tty/serial/msm_geni_serial_console.c
> @@ -0,0 +1,480 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +#include <linux/console.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/serial_core.h>
> +
> +#define SE_UART_TX_TRANS_CFG		(0x25C)
> +#define SE_UART_TX_WORD_LEN		(0x268)
> +#define SE_UART_TX_STOP_BIT_LEN		(0x26C)
> +#define SE_UART_TX_TRANS_LEN		(0x270)
> +#define SE_UART_TX_PARITY_CFG		(0x2A4)
> +/* SE_UART_TRANS_CFG */
> +#define UART_CTS_MASK		(BIT(1))
> +/* UART M_CMD OP codes */
> +#define UART_START_TX		(0x1)
> +
> +#define UART_OVERSAMPLING	(32)
> +#define DEF_FIFO_DEPTH_WORDS	(16)
> +#define DEF_TX_WM		(2)
> +#define DEF_FIFO_WIDTH_BITS	(32)
> +
> +#define GENI_FORCE_DEFAULT_REG		(0x20)
> +#define GENI_OUTPUT_CTRL		(0x24)
> +#define GENI_CGC_CTRL			(0x28)
> +#define GENI_SER_M_CLK_CFG		(0x48)
> +#define GENI_FW_REVISION_RO		(0x68)
> +
> +#define SE_GENI_TX_PACKING_CFG0		(0x260)
> +#define SE_GENI_TX_PACKING_CFG1		(0x264)
> +#define SE_GENI_M_CMD0			(0x600)
> +#define SE_GENI_M_CMD_CTRL_REG		(0x604)
> +#define SE_GENI_M_IRQ_STATUS		(0x610)
> +#define SE_GENI_M_IRQ_EN		(0x614)
> +#define SE_GENI_M_IRQ_CLEAR		(0x618)
> +#define SE_GENI_TX_FIFOn		(0x700)
> +#define SE_GENI_TX_WATERMARK_REG	(0x80C)
> +
> +#define SE_IRQ_EN			(0xE1C)
> +#define SE_HW_PARAM_0			(0xE24)
> +#define SE_HW_PARAM_1			(0xE28)
> +
> +/* GENI_OUTPUT_CTRL fields */
> +#define DEFAULT_IO_OUTPUT_CTRL_MSK	(GENMASK(6, 0))
> +
> +/* GENI_FORCE_DEFAULT_REG fields */
> +#define FORCE_DEFAULT	(BIT(0))
> +
> +/* GENI_CGC_CTRL fields */
> +#define CFG_AHB_CLK_CGC_ON		(BIT(0))
> +#define CFG_AHB_WR_ACLK_CGC_ON		(BIT(1))
> +#define DATA_AHB_CLK_CGC_ON		(BIT(2))
> +#define SCLK_CGC_ON			(BIT(3))
> +#define TX_CLK_CGC_ON			(BIT(4))
> +#define RX_CLK_CGC_ON			(BIT(5))
> +#define EXT_CLK_CGC_ON			(BIT(6))
> +#define PROG_RAM_HCLK_OFF		(BIT(8))
> +#define PROG_RAM_SCLK_OFF		(BIT(9))
> +#define DEFAULT_CGC_EN			(GENMASK(6, 0))
> +
> +/* GENI_STATUS fields */
> +#define M_GENI_CMD_ACTIVE		(BIT(0))
> +
> +/* GENI_SER_M_CLK_CFG/GENI_SER_S_CLK_CFG */
> +#define SER_CLK_EN			(BIT(0))
> +#define CLK_DIV_MSK			(GENMASK(15, 4))
> +#define CLK_DIV_SHFT			(4)
> +
> +/* CLK_CTRL_RO fields */
> +
> +/* FIFO_IF_DISABLE_RO fields */
> +#define FIFO_IF_DISABLE			(BIT(0))
> +
> +/* FW_REVISION_RO fields */
> +#define FW_REV_PROTOCOL_MSK	(GENMASK(15, 8))
> +#define FW_REV_PROTOCOL_SHFT	(8)
> +#define FW_REV_VERSION_MSK	(GENMASK(7, 0))
> +
> +/* GENI_CLK_SEL fields */
> +#define CLK_SEL_MSK		(GENMASK(2, 0))
> +
> +/* SE_GENI_DMA_MODE_EN */
> +#define GENI_DMA_MODE_EN	(BIT(0))
> +
> +/* GENI_M_CMD0 fields */
> +#define M_OPCODE_MSK		(GENMASK(31, 27))
> +#define M_OPCODE_SHFT		(27)
> +#define M_PARAMS_MSK		(GENMASK(26, 0))
> +
> +/* GENI_M_CMD_CTRL_REG */
> +#define M_GENI_CMD_CANCEL	BIT(2)
> +#define M_GENI_CMD_ABORT	BIT(1)
> +#define M_GENI_DISABLE		BIT(0)
> +
> +/* GENI_M_IRQ_EN fields */
> +#define M_CMD_DONE_EN		(BIT(0))
> +#define M_CMD_OVERRUN_EN	(BIT(1))
> +#define M_ILLEGAL_CMD_EN	(BIT(2))
> +#define M_CMD_FAILURE_EN	(BIT(3))
> +#define M_CMD_CANCEL_EN		(BIT(4))
> +#define M_CMD_ABORT_EN		(BIT(5))
> +#define M_TIMESTAMP_EN		(BIT(6))
> +#define M_GP_SYNC_IRQ_0_EN	(BIT(8))
> +#define M_IO_DATA_DEASSERT_EN	(BIT(22))
> +#define M_IO_DATA_ASSERT_EN	(BIT(23))
> +#define M_TX_FIFO_RD_ERR_EN	(BIT(28))
> +#define M_TX_FIFO_WR_ERR_EN	(BIT(29))
> +#define M_TX_FIFO_WATERMARK_EN	(BIT(30))
> +#define M_SEC_IRQ_EN		(BIT(31))
> +#define M_COMMON_GENI_M_IRQ_EN	(GENMASK(6, 1) | \
> +				M_IO_DATA_DEASSERT_EN | \
> +				M_IO_DATA_ASSERT_EN | M_TX_FIFO_RD_ERR_EN | \
> +				M_TX_FIFO_WR_ERR_EN)
> +
> +
> +/* GENI_TX_FIFO_STATUS fields */
> +#define TX_FIFO_WC		(GENMASK(27, 0))
> +
> +/* SE_IRQ_EN fields */
> +#define GENI_M_IRQ_EN		(BIT(2))
> +
> +#define UART_PROTOCOL	2
> +#define GET_DEV_PORT(uport) \
> +		container_of(uport, struct msm_geni_serial_earlycon_port, uport)
> +
> +
> +static int get_se_proto_earlycon(void __iomem *base)
> +{
> +	int proto;
> +
> +	proto = ((readl_relaxed(base + GENI_FW_REVISION_RO)
> +			& FW_REV_PROTOCOL_MSK) >> FW_REV_PROTOCOL_SHFT);
> +	return proto;
> +}
> +
> +static void se_get_packing_config_earlycon(int bpw, int pack_words,
> +	bool msb_to_lsb, unsigned long *cfg0, unsigned long *cfg1)
> +{
> +	u32 cfg[4] = {0};
> +	int len, i;
> +	int temp_bpw = bpw;
> +	int idx_start = (msb_to_lsb ? (bpw - 1) : 0);
> +	int idx_delta = (msb_to_lsb ? -BITS_PER_BYTE : BITS_PER_BYTE);
> +	int ceil_bpw = ((bpw & (BITS_PER_BYTE - 1)) ?
> +			((bpw & ~(BITS_PER_BYTE - 1)) + BITS_PER_BYTE) : bpw);
> +	int iter = (ceil_bpw * pack_words) >> 3;
> +	int idx = idx_start;
> +
> +	if (iter <= 0 || iter > 4) {
> +		*cfg0 = 0;
> +		*cfg1 = 0;
> +		return;
> +	}
> +
> +	for (i = 0; i < iter; i++) {
> +		len = (temp_bpw < BITS_PER_BYTE) ?
> +				(temp_bpw - 1) : BITS_PER_BYTE - 1;
> +		cfg[i] = ((idx << 5) | (msb_to_lsb << 4) | (len << 1));
> +		idx = ((temp_bpw - BITS_PER_BYTE) <= 0) ?
> +				((i + 1) * BITS_PER_BYTE) + idx_start :
> +				idx + idx_delta;
> +		temp_bpw = ((temp_bpw - BITS_PER_BYTE) <= 0) ?
> +				bpw : (temp_bpw - BITS_PER_BYTE);
> +	}
> +	cfg[iter - 1] |= 1;
> +	*cfg0 = cfg[0] | (cfg[1] << 10);
> +	*cfg1 = cfg[2] | (cfg[3] << 10);
> +}
> +
> +static void se_geni_irq_en_earlycon(void __iomem *base)
> +{
> +	unsigned int common_geni_m_irq_en;
> +
> +	common_geni_m_irq_en = readl_relaxed(base + SE_GENI_M_IRQ_EN);
> +	common_geni_m_irq_en |= M_COMMON_GENI_M_IRQ_EN;
> +	writel_relaxed(common_geni_m_irq_en, base + SE_GENI_M_IRQ_EN);
> +}
> +
> +static void se_io_set_mode_earlycon(void __iomem *base)
> +{
> +	unsigned int io_mode;
> +
> +	io_mode = readl_relaxed(base + SE_IRQ_EN);
> +	io_mode |= (GENI_M_IRQ_EN);
> +	writel_relaxed(io_mode, base + SE_IRQ_EN);
> +}
> +
> +static void se_io_init_earlycon(void __iomem *base)
> +{
> +	unsigned int io_op_ctrl;
> +	unsigned int geni_cgc_ctrl;
> +
> +	geni_cgc_ctrl = readl_relaxed(base + GENI_CGC_CTRL);
> +	geni_cgc_ctrl |= DEFAULT_CGC_EN;
> +	io_op_ctrl = DEFAULT_IO_OUTPUT_CTRL_MSK;
> +	writel_relaxed(geni_cgc_ctrl, base + GENI_CGC_CTRL);
> +
> +	writel_relaxed(io_op_ctrl, base + GENI_OUTPUT_CTRL);
> +	writel_relaxed(FORCE_DEFAULT, base + GENI_FORCE_DEFAULT_REG);
> +}
> +
> +static void geni_se_select_fifo_mode_earlycon(void __iomem *base)
> +{
> +	unsigned int common_geni_m_irq_en;
> +
> +	writel_relaxed(0xFFFFFFFF, base + SE_GENI_M_IRQ_CLEAR);
> +	writel_relaxed(0xFFFFFFFF, base + SE_IRQ_EN);
> +
> +	common_geni_m_irq_en = readl_relaxed(base + SE_GENI_M_IRQ_EN);
> +	writel_relaxed(common_geni_m_irq_en, base + SE_GENI_M_IRQ_EN);
> +}
> +
> +struct msm_geni_serial_earlycon_port {
> +	struct uart_port uport;
> +	unsigned int tx_fifo_depth;
> +	unsigned int tx_fifo_width;
> +	unsigned int tx_wm;
> +	unsigned int xmit_size;
> +	unsigned int cur_baud;
> +};
> +
> +static int get_clk_cfg(unsigned long clk_freq, unsigned long *ser_clk)
> +{
> +	static unsigned long root_freq[] = {7372800, 14745600, 19200000,
> +		29491200, 32000000, 48000000, 64000000, 80000000, 96000000,
> +		 100000000, 102400000, 112000000, 120000000, 128000000};
> +	int i;
> +	int match = -1;
> +
> +	for (i = 0; i < ARRAY_SIZE(root_freq); i++) {
> +		if (clk_freq > root_freq[i])
> +			continue;
> +
> +		if (!(root_freq[i] % clk_freq)) {
> +			match = i;
> +			break;
> +		}
> +	}
> +	if (match != -1)
> +		*ser_clk = root_freq[match];
> +
> +	return match;
> +}
> +
> +
> +static int get_clk_div_rate(unsigned int baud, unsigned long *desired_clk_rate)
> +{
> +	unsigned long ser_clk;
> +	int dfs_index;
> +	int clk_div = 0;
> +
> +	*desired_clk_rate = baud * UART_OVERSAMPLING;
> +	dfs_index = get_clk_cfg(*desired_clk_rate, &ser_clk);
> +	if (dfs_index < 0) {
> +		clk_div = -EINVAL;
> +		goto exit_get_clk_div_rate;
> +	}
> +
> +	clk_div = ser_clk / *desired_clk_rate;
> +	*desired_clk_rate = ser_clk;
> +exit_get_clk_div_rate:
> +	return clk_div;
> +}
> +
> +
> +static void msm_geni_serial_wr_char(struct uart_port *uport, int ch)
> +{
> +	writel_relaxed(ch, uport->membase + SE_GENI_TX_FIFOn);
> +}
> +
> +static int msm_geni_serial_poll_bit(struct uart_port *uport,
> +					int offset, int bit_field, bool set)
> +{
> +	int iter = 0;
> +	bool met = false, cond = false;
> +	unsigned int reg, baud = 115200, total_iter = 1000;
> +	unsigned int fifo_bits = DEF_FIFO_DEPTH_WORDS * DEF_FIFO_WIDTH_BITS;
> +	struct msm_geni_serial_earlycon_port *port = NULL;
> +
> +	if (uport->private_data && !uart_console(uport)) {
> +		port = GET_DEV_PORT(uport);
> +		baud = (port->cur_baud ? port->cur_baud : 115200);
> +		fifo_bits = port->tx_fifo_depth * port->tx_fifo_width;
> +		/*
> +		 * Total polling iterations based on FIFO worth of bytes to be
> +		 * sent at current baud. Add a little fluff to the wait.
> +		 */
> +		total_iter = ((fifo_bits * USEC_PER_SEC) / baud) / 10;
> +		total_iter += 50;
> +	}
> +
> +	while (iter < total_iter) {
> +		reg = readl_relaxed(uport->membase + offset);
> +		cond = reg & bit_field;
> +		if (cond == set) {
> +			met = true;
> +			break;
> +		}
> +		udelay(10);
> +		iter++;
> +	}
> +	return met;
> +}
> +
> +static void msm_geni_serial_poll_cancel_tx(struct uart_port *uport)
> +{
> +	int done = 0;
> +	unsigned int irq_clear = M_CMD_DONE_EN;
> +
> +	done = msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
> +						M_CMD_DONE_EN, true);
> +	if (!done) {
> +		writel_relaxed(M_GENI_CMD_ABORT,
> +				uport->membase + SE_GENI_M_CMD_CTRL_REG);
> +		irq_clear |= M_CMD_ABORT_EN;
> +		msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
> +							M_CMD_ABORT_EN, true);
> +	}
> +	writel_relaxed(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR);
> +}
> +
> +static void msm_geni_serial_setup_tx(struct uart_port *uport,
> +				unsigned int xmit_size)
> +{
> +	u32 m_cmd = 0;
> +
> +	writel_relaxed(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN);
> +	m_cmd |= (UART_START_TX << M_OPCODE_SHFT);
> +	writel_relaxed(m_cmd, uport->membase + SE_GENI_M_CMD0);
> +}
> +
> +
> +static void
> +__msm_geni_serial_console_write(struct uart_port *uport, const char *s,
> +				unsigned int count)
> +{
> +	int new_line = 0;
> +	int i;
> +	int bytes_to_send = count;
> +	int fifo_depth = DEF_FIFO_DEPTH_WORDS;
> +	int tx_wm = DEF_TX_WM;
> +
> +	for (i = 0; i < count; i++) {
> +		if (s[i] == '\n')
> +			new_line++;
> +	}
> +
> +	bytes_to_send += new_line;
> +	writel_relaxed(tx_wm, uport->membase + SE_GENI_TX_WATERMARK_REG);
> +	msm_geni_serial_setup_tx(uport, bytes_to_send);
> +	i = 0;
> +	while (i < count) {
> +		u32 chars_to_write = 0;
> +		u32 avail_fifo_bytes = (fifo_depth - tx_wm);
> +		/*
> +		 * If the WM bit never set, then the Tx state machine is not
> +		 * in a valid state, so break, cancel/abort any existing
> +		 * command. Unfortunately the current data being written is
> +		 * lost.
> +		 */
> +		while (!msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
> +						M_TX_FIFO_WATERMARK_EN, true))
> +			break;
> +		chars_to_write = min((unsigned int)(count - i),
> +							avail_fifo_bytes);
> +		if ((chars_to_write << 1) > avail_fifo_bytes)
> +			chars_to_write = (avail_fifo_bytes >> 1);
> +		uart_console_write(uport, (s + i), chars_to_write,
> +					msm_geni_serial_wr_char);
> +		writel_relaxed(M_TX_FIFO_WATERMARK_EN,
> +			uport->membase + SE_GENI_M_IRQ_CLEAR);
> +		i += chars_to_write;
> +	}
> +	msm_geni_serial_poll_cancel_tx(uport);
> +}
> +
> +
> +static void
> +msm_geni_serial_early_console_write(struct console *con, const char *s,
> +			unsigned int n)
> +{
> +	struct earlycon_device *dev = con->data;
> +
> +	__msm_geni_serial_console_write(&dev->port, s, n);
> +}
> +
> +static int __init
> +msm_geni_serial_earlycon_setup(struct earlycon_device *dev,
> +		const char *opt)
> +{
> +	struct uart_port *uport = &dev->port;
> +	int ret = 0;
> +	u32 tx_trans_cfg = 0;
> +	u32 tx_parity_cfg = 0;
> +	u32 rx_trans_cfg = 0;
> +	u32 rx_parity_cfg = 0;
> +	u32 stop_bit = 0;
> +	u32 rx_stale = 0;
> +	u32 bits_per_char = 0;
> +	u32 s_clk_cfg = 0;
> +	u32 baud = 115200;
> +	int clk_div;
> +	unsigned long clk_rate;
> +	unsigned long cfg0, cfg1;
> +
> +	if (!uport->membase) {
> +		ret = -ENOMEM;
> +		goto exit_geni_serial_earlyconsetup;
> +	}
> +
> +	if (get_se_proto_earlycon(uport->membase) != UART_PROTOCOL) {
> +		ret = -ENXIO;
> +		goto exit_geni_serial_earlyconsetup;
> +	}
> +
> +	/*
> +	 * Ignore Flow control.
> +	 * Disable Tx Parity.
> +	 * Don't check Parity during Rx.
> +	 * Disable Rx Parity.
> +	 * n = 8.
> +	 * Stop bit = 0.
> +	 * Stale timeout in bit-time (3 chars worth).
> +	 */
> +	tx_trans_cfg |= UART_CTS_MASK;
> +	tx_parity_cfg = 0;
> +	rx_trans_cfg = 0;
> +	rx_parity_cfg = 0;
> +	bits_per_char = 0x8;
> +	stop_bit = 0;
> +	rx_stale = 0x18;
> +	clk_div = get_clk_div_rate(baud, &clk_rate);
> +	if (clk_div <= 0) {
> +		ret = -EINVAL;
> +		goto exit_geni_serial_earlyconsetup;
> +	}
> +	/* QUP HW ver > 2.5 needs 16 clock pulses to sample
> +	 * 1 bit of data, instead of 32 clock pulses in older
> +	 * QUP HW.
> +	 * For now, support only QUP HW ver > 2.5. So reduce the
> +	 * clk frequency to half by doubling the divider value.
> +	 */
> +	clk_div *= 2;
> +
> +	s_clk_cfg |= SER_CLK_EN;
> +	s_clk_cfg |= (clk_div << CLK_DIV_SHFT);
> +
> +	/*
> +	 * Make an unconditional cancel on the main sequencer to reset
> +	 * it else we could end up in data loss scenarios.
> +	 */
> +	writel_relaxed(0x21, uport->membase + GENI_SER_M_CLK_CFG);
> +	readl_relaxed(uport->membase + GENI_SER_M_CLK_CFG);
> +
> +	msm_geni_serial_poll_cancel_tx(uport);
> +
> +	se_get_packing_config_earlycon(8, 1, false, &cfg0, &cfg1);
> +
> +	se_io_init_earlycon(uport->membase);
> +	se_io_set_mode_earlycon(uport->membase);
> +	se_geni_irq_en_earlycon(uport->membase);
> +
> +	geni_se_select_fifo_mode_earlycon(uport->membase);
> +	writel_relaxed(cfg0, uport->membase + SE_GENI_TX_PACKING_CFG0);
> +	writel_relaxed(cfg1, uport->membase + SE_GENI_TX_PACKING_CFG1);
> +	writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
> +	writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
> +	writel_relaxed(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
> +	writel_relaxed(stop_bit, uport->membase + SE_UART_TX_STOP_BIT_LEN);
> +	writel_relaxed(s_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
> +
> +	dev->con->write = msm_geni_serial_early_console_write;
> +	dev->con->setup = NULL;
> +exit_geni_serial_earlyconsetup:
> +	return ret;
> +}
> +OF_EARLYCON_DECLARE(msm_geni_serial, "qcom,msm-geni-console",
> +		msm_geni_serial_earlycon_setup);
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux