On Fri, May 29, 2020 at 2:09 PM Cristian Ciocaltea
<cristian.ciocaltea@xxxxxxxxx> wrote:
>
> Running a lockdep-enabled kernel leads to the following splat when
> probing the owl-uart driver:
>
> [ 1.271784] b0124000.serial: ttyOWL2 at MMIO 0xb0124000 (irq = 22, base_baud = 1500000) is a owl-uart
> [ 1.281226] INFO: trying to register non-static key.
> [ 1.286179] the code is fine but needs lockdep annotation.
> [ 1.291648] turning off the locking correctness validator.
> [ 1.297125] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc7+ #70
> [ 1.303462] Hardware name: Generic DT based system
> [ 1.308268] [<80111d3c>] (unwind_backtrace) from [<8010c9b8>] (show_stack+0x10/0x14)
> [ 1.316003] [<8010c9b8>] (show_stack) from [<805016b4>] (dump_stack+0xb4/0xe0)
> [ 1.323218] [<805016b4>] (dump_stack) from [<80182dec>] (register_lock_class+0x25c/0x8f4)
> [ 1.331391] [<80182dec>] (register_lock_class) from [<8017ee34>] (__lock_acquire+0xb4/0x2ee4)
> [ 1.339901] [<8017ee34>] (__lock_acquire) from [<8018291c>] (lock_acquire+0x424/0x4c8)
> [ 1.347813] [<8018291c>] (lock_acquire) from [<808597b0>] (_raw_spin_lock_irqsave+0x54/0x68)
> [ 1.356242] [<808597b0>] (_raw_spin_lock_irqsave) from [<80582e94>] (uart_add_one_port+0x384/0x510)
> [ 1.365276] [<80582e94>] (uart_add_one_port) from [<8058b4d0>] (owl_uart_probe+0x1bc/0x248)
> [ 1.373621] [<8058b4d0>] (owl_uart_probe) from [<8059c0e4>] (platform_drv_probe+0x48/0x94)
> [ 1.381874] [<8059c0e4>] (platform_drv_probe) from [<805997c4>] (really_probe+0x200/0x470)
> [ 1.390123] [<805997c4>] (really_probe) from [<80599c80>] (driver_probe_device+0x16c/0x1bc)
> [ 1.398461] [<80599c80>] (driver_probe_device) from [<80599f18>] (device_driver_attach+0x44/0x60)
> [ 1.407317] [<80599f18>] (device_driver_attach) from [<8059a078>] (__driver_attach+0x144/0x14c)
> [ 1.416000] [<8059a078>] (__driver_attach) from [<805978ac>] (bus_for_each_dev+0x5c/0xb4)
> [ 1.424162] [<805978ac>] (bus_for_each_dev) from [<8059896c>] (bus_add_driver+0x118/0x204)
> [ 1.432410] [<8059896c>] (bus_add_driver) from [<8059ae6c>] (driver_register+0xbc/0xf8)
> [ 1.440405] [<8059ae6c>] (driver_register) from [<80c1fd24>] (owl_uart_init+0x20/0x40)
> [ 1.448313] [<80c1fd24>] (owl_uart_init) from [<801021d8>] (do_one_initcall+0x184/0x3a4)
> [ 1.456399] [<801021d8>] (do_one_initcall) from [<80c01100>] (kernel_init_freeable+0x264/0x2e4)
> [ 1.465085] [<80c01100>] (kernel_init_freeable) from [<80850a88>] (kernel_init+0x8/0x110)
> [ 1.473249] [<80850a88>] (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
> [ 1.480800] Exception stack(0xee8bdfb0 to 0xee8bdff8)
> [ 1.485841] dfa0: 00000000 00000000 00000000 00000000
> [ 1.494002] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 1.502162] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 1.508914] printk: console [ttyOWL2] enabled
>
> The locking issue occurs in uart_configure_port() when trying to
> guard the call to set_mctrl().
>
> uart_add_one_port() should normally initialize the spinlock via
> uart_port_spin_lock_init(), but it never happens because the port is
> detected as a console and, as a consequence, the spinlock is expected
> to be already initialized.
>
> The commit a3cb39d258ef
> ("serial: core: Allow detach and attach serial device for console")
> changed the lock initialization logic to assume the spinlock is
> initialized even if the console is not enabled.
>
> Therefore, initialize the lock explicitly in owl_uart_probe(), before
> attempting to invoke uart_add_one_port().
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
You are faster than me, thanks!
> Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
> ---
> drivers/tty/serial/owl-uart.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
> index c149f8c30007..c2fa2f15d50a 100644
> --- a/drivers/tty/serial/owl-uart.c
> +++ b/drivers/tty/serial/owl-uart.c
> @@ -705,6 +705,8 @@ static int owl_uart_probe(struct platform_device *pdev)
> owl_uart_ports[pdev->id] = owl_port;
> platform_set_drvdata(pdev, owl_port);
>
> + spin_lock_init(&owl_port->port.lock);
> +
> ret = uart_add_one_port(&owl_uart_driver, &owl_port->port);
> if (ret)
> owl_uart_ports[pdev->id] = NULL;
> --
> 2.26.2
>
--
With Best Regards,
Andy Shevchenko
