[PATCH v3 2/6] sc16is7xx: Add flag to activate IrDA mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pascal Huerst <pascal.huerst@xxxxxxxxx>

This series of uart controllers is able to work in IrDA mode.
Add per-port flag to the device-tree to enable that feature if needed.

Signed-off-by: Pascal Huerst <pascal.huerst@xxxxxxxxx>
Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 7d3ae31cc720..cf9cf59bb04e 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -315,6 +315,7 @@ struct sc16is7xx_one {
 	struct kthread_work		tx_work;
 	struct kthread_work		reg_work;
 	struct sc16is7xx_one_config	config;
+	bool				irda_mode;
 };
 
 struct sc16is7xx_port {
@@ -994,6 +995,7 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
 
 static int sc16is7xx_startup(struct uart_port *port)
 {
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	unsigned int val;
 
@@ -1032,6 +1034,13 @@ static int sc16is7xx_startup(struct uart_port *port)
 	/* Now, initialize the UART */
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
 
+	/* Enable IrDA mode if requested in DT */
+	/* This bit must be written with LCR[7] = 0 */
+	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_IRDA_BIT,
+			      one->irda_mode ?
+				SC16IS7XX_MCR_IRDA_BIT : 0);
+
 	/* Enable the Rx and Tx FIFO */
 	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
 			      SC16IS7XX_EFCR_RXDISABLE_BIT |
@@ -1302,6 +1311,17 @@ static int sc16is7xx_probe(struct device *dev,
 		sc16is7xx_power(&s->p[i].port, 0);
 	}
 
+	if (dev->of_node) {
+		struct property *prop;
+		const __be32 *p;
+		u32 u;
+
+		of_property_for_each_u32(dev->of_node, "linux,irda-mode-ports",
+					 prop, p, u)
+			if (u < devtype->nr_uart)
+				s->p[u].irda_mode = true;
+	}
+
 	/* Setup interrupt */
 	ret = devm_request_irq(dev, irq, sc16is7xx_irq,
 			       flags, dev_name(dev), s);
-- 
2.26.2




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux