[PATCH v4 12/12] serial: amba-pl011: Support kgdboc_earlycon

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sumit Garg <sumit.garg@xxxxxxxxxx>

Implement the read() function in the early console driver. With
recently added kgdboc_earlycon feature, this allows you to use kgdb
to debug fairly early into the system boot.

We only bother implementing this if polling is enabled since kgdb can't
be enabled without that.

Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v4: None
Changes in v3:
- ("serial: amba-pl011: Support kgdboc_earlycon") pulled into my v3.
- Renamed earlycon_kgdboc to kgdboc_earlycon.

Changes in v2: None

 drivers/tty/serial/amba-pl011.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 2296bb0f9578..c010f639298d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2435,6 +2435,37 @@ static void pl011_early_write(struct console *con, const char *s, unsigned n)
 	uart_console_write(&dev->port, s, n, pl011_putc);
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int pl011_getc(struct uart_port *port)
+{
+	if (readl(port->membase + UART01x_FR) & UART01x_FR_RXFE)
+		return NO_POLL_CHAR;
+
+	if (port->iotype == UPIO_MEM32)
+		return readl(port->membase + UART01x_DR);
+	else
+		return readb(port->membase + UART01x_DR);
+}
+
+static int pl011_early_read(struct console *con, char *s, unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+	int ch, num_read = 0;
+
+	while (num_read < n) {
+		ch = pl011_getc(&dev->port);
+		if (ch == NO_POLL_CHAR)
+			break;
+
+		s[num_read++] = ch;
+	}
+
+	return num_read;
+}
+#else
+#define pl011_early_read NULL
+#endif
+
 /*
  * On non-ACPI systems, earlycon is enabled by specifying
  * "earlycon=pl011,<address>" on the kernel command line.
@@ -2454,6 +2485,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 		return -ENODEV;
 
 	device->con->write = pl011_early_write;
+	device->con->read = pl011_early_read;
 
 	return 0;
 }
-- 
2.26.2.645.ge9eca65c58-goog




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux