[PATCH 12/28] spi: dt-bindings: spi-controller: Slaves have no address cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SPI controllers in slave mode have a single child node that has no
address. Enforce #address-cells of zero instead of one.

Fixes: 0a1b929356830 ("spi: Add YAML schemas for the generic SPI options")
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 .../bindings/spi/spi-controller.yaml          | 23 ++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index d8e5509a70816..30d774cf6cc95 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -15,16 +15,27 @@ description: |
   controller may be described for use in SPI master mode or in SPI slave mode,
   but not for both at the same time.
 
+allOf:
+  - if:
+      required:
+        - spi-slave
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+        "#size-cells":
+          const: 0
+    else:
+      properties:
+        "#address-cells":
+          const: 1
+        "#size-cells":
+          const: 0
+
 properties:
   $nodename:
     pattern: "^spi(@.*|-[0-9a-f])*$"
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   cs-gpios:
     description: |
       GPIOs used as chip selects.
-- 
2.25.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux