at least on bananapi-r2 we have only 1 IRQ and need to check for IRQ-count to fix following Errors during probe: [ 4.935780] mt6577-uart 11004000.serial: IRQ index 1 not found [ 4.962589] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 202, base_baud = 1625000) is a ST16650V2 [ 4.972127] mt6577-uart 11002000.serial: IRQ index 1 not found [ 4.998927] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 203, base_baud = 1625000) is a ST16650V2 [ 5.008474] mt6577-uart 11003000.serial: IRQ index 1 not found based on Patch from Anson Huang https://patchwork.ozlabs.org/patch/1164500/ Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_mtk.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index b411ba4eb5e9..bf250187928a 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -485,6 +485,7 @@ static int mtk8250_probe(struct platform_device *pdev) struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); struct mtk8250_data *data; + int irq_count; int err; if (!regs || !irq) { @@ -544,7 +545,15 @@ static int mtk8250_probe(struct platform_device *pdev) pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); - data->rx_wakeup_irq = platform_get_irq(pdev, 1); + irq_count = platform_irq_count(pdev); + if (irq_count < 0) + return irq_count; + + if (irq_count > 1) { + data->rx_wakeup_irq = platform_get_irq(pdev, 1); + if (data->rx_wakeup_irq < 0) + data->rx_wakeup_irq = 0; + } return 0; } -- 2.17.1
