Re: [PATCH v9 5/5] MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/2019 05:59 PM, Thomas Bogendoerfer wrote:

> PROM only enables ethernet PHY on first Origin 200 module, so we must
> do it ourselves for the second module.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
> ---
>  arch/mips/pci/pci-ip27.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
> index 441eb9383b20..7cc784cb299b 100644
> --- a/arch/mips/pci/pci-ip27.c
> +++ b/arch/mips/pci/pci-ip27.c
> @@ -7,6 +7,11 @@
>   * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@xxxxxxxxxxxxxx)
>   * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
>   */
> +#include <asm/sn/addrs.h>
> +#include <asm/sn/types.h>
> +#include <asm/sn/klconfig.h>
> +#include <asm/sn/hub.h>
> +#include <asm/sn/ioc3.h>
>  #include <asm/pci/bridge.h>
>  
>  dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> @@ -31,3 +36,20 @@ int pcibus_to_node(struct pci_bus *bus)
>  }
>  EXPORT_SYMBOL(pcibus_to_node);
>  #endif /* CONFIG_NUMA */
> +
> +static void ip29_fixup_phy(struct pci_dev *dev)
> +{
> +	int nasid = pcibus_to_node(dev->bus);
> +	u32 sid;
> +
> +	if (nasid != 1)
> +		return; /* only needed on second module */
> +
> +	/* enable ethernet PHY on IP29 systemboard */
> +	pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
> +	if (sid == ((PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_IP29_SYSBOARD))

   I thought PCI was little endian, thuis vendor ID at offset 0 and device ID
at offset 2?

[...]

MBR, Sergei



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux