On 23/05/2019 19:04, Matthias Brugger wrote:
>
>
> On 23/05/2019 09:35, Long Cheng wrote:
>> 1. add uart APDMA controller device node
>> 2. add uart 0/1/2/3/4/5 DMA function
>>
>> Signed-off-by: Long Cheng <long.cheng@xxxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 51 +++++++++++++++++++++++++++++
>> 1 file changed, 51 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
>> index 43307ba..a7a7362 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
>> @@ -300,6 +300,9 @@
>> interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 10
>> + &apdma 11>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>> @@ -369,6 +372,39 @@
>> (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
>> };
>>
>> + apdma: dma-controller@11000400 {
>> + compatible = "mediatek,mt2712-uart-dma",
>> + "mediatek,mt6577-uart-dma";
>
> I was able to find a binding descpription but no actual driver.
> drivers/dma/mediatek only has hsdma and cqdma but no apdma driver.
>
> Seems there is something missing here.
>
Sorry I just realized that tje driver got merged from v12.
Regards,
Matthias
> Regards,
> Matthias
>
>> + reg = <0 0x11000400 0 0x80>,
>> + <0 0x11000480 0 0x80>,
>> + <0 0x11000500 0 0x80>,
>> + <0 0x11000580 0 0x80>,
>> + <0 0x11000600 0 0x80>,
>> + <0 0x11000680 0 0x80>,
>> + <0 0x11000700 0 0x80>,
>> + <0 0x11000780 0 0x80>,
>> + <0 0x11000800 0 0x80>,
>> + <0 0x11000880 0 0x80>,
>> + <0 0x11000900 0 0x80>,
>> + <0 0x11000980 0 0x80>;
>> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
>> + dma-requests = <12>;
>> + clocks = <&pericfg CLK_PERI_AP_DMA>;
>> + clock-names = "apdma";
>> + #dma-cells = <1>;
>> + };
>> +
>> auxadc: adc@11001000 {
>> compatible = "mediatek,mt2712-auxadc";
>> reg = <0 0x11001000 0 0x1000>;
>> @@ -385,6 +421,9 @@
>> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 0
>> + &apdma 1>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>> @@ -395,6 +434,9 @@
>> interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 2
>> + &apdma 3>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>> @@ -405,6 +447,9 @@
>> interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 4
>> + &apdma 5>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>> @@ -415,6 +460,9 @@
>> interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 6
>> + &apdma 7>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>> @@ -629,6 +677,9 @@
>> interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&baud_clk>, <&sys_clk>;
>> clock-names = "baud", "bus";
>> + dmas = <&apdma 8
>> + &apdma 9>;
>> + dma-names = "tx", "rx";
>> status = "disabled";
>> };
>>
>>
