On Wed, 20 Mar 2019 at 10:50, Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> wrote:
>
> Add the additional power domain and the OPP table for ufs on sdm845
> so the driver can set the appropriate performance state of the
> power domain while setting the clock rate.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 027ffe6e93e8..a3af4a1757b4 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1140,6 +1140,21 @@
> };
> };
>
> + ufs_opp_table: ufs-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-50000000 {
> + opp-hz = /bits/ 64 <50000000>;
> + required-opps = <&rpmhpd_opp_min_svs>;
> + };
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + };
> + };
> +
> ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> @@ -1148,7 +1163,7 @@
> phys = <&ufs_mem_phy_lanes>;
> phy-names = "ufsphy";
> lanes-per-direction = <2>;
> - power-domains = <&gcc UFS_PHY_GDSC>;
> + power-domains = <&gcc UFS_PHY_GDSC>, <&rpmhpd SDM845_CX>;
You probably want to use "power-domain-names" as well.
[...]
Kind regards
Uffe
