Fix checkpatch warnings:
WARNING: Missing a blank line after declarations
#43: FILE: drivers/tty/serial/timbuart.c:43:
+ u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+ iowrite32(ier, port->membase + TIMBUART_IER);
WARNING: Missing a blank line after declarations
#50: FILE: drivers/tty/serial/timbuart.c:50:
+ u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+ iowrite32(ier, port->membase + TIMBUART_IER);
WARNING: Missing a blank line after declarations
#86: FILE: drivers/tty/serial/timbuart.c:86:
+ u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+ port->icount.rx++;
WARNING: Missing a blank line after declarations
#202: FILE: drivers/tty/serial/timbuart.c:202:
+ u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+ dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
WARNING: Block comments use * on subsequent lines
#296: FILE: drivers/tty/serial/timbuart.c:296:
+ /* The serial layer calls into this once with old = NULL when setting
+ up initially */
WARNING: Block comments use a trailing */ on a separate line
#296: FILE: drivers/tty/serial/timbuart.c:296:
Signed-off-by: Enrico Weigelt <info@xxxxxxxxx>
---
drivers/tty/serial/timbuart.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index dcce936..d80c332 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -40,6 +40,7 @@ static void timbuart_stop_rx(struct uart_port *port)
{
/* spin lock held by upper layer, disable all RX interrupts */
u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+
iowrite32(ier, port->membase + TIMBUART_IER);
}
@@ -47,6 +48,7 @@ static void timbuart_stop_tx(struct uart_port *port)
{
/* spinlock held by upper layer, disable TX interrupt */
u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+
iowrite32(ier, port->membase + TIMBUART_IER);
}
@@ -83,6 +85,7 @@ static void timbuart_rx_chars(struct uart_port *port)
while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+
port->icount.rx++;
tty_insert_flip_char(tport, ch, TTY_NORMAL);
}
@@ -199,6 +202,7 @@ static void timbuart_tasklet(unsigned long arg)
static unsigned int timbuart_get_mctrl(struct uart_port *port)
{
u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+
dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
if (cts & TIMBUART_CTRL_CTS)
@@ -293,7 +297,8 @@ static void timbuart_set_termios(struct uart_port *port,
baud = baudrates[bindex];
/* The serial layer calls into this once with old = NULL when setting
- up initially */
+ * up initially
+ */
if (old)
tty_termios_copy_hw(termios, old);
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -500,4 +505,3 @@ static int timbuart_remove(struct platform_device *dev)
MODULE_DESCRIPTION("Timberdale UART driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:timb-uart");
-
--
1.9.1
