The TX interrupt is marked as edge triggered, so it will
already be acked by the top-level irq code, and does not
need the ack in the driver.
Removing this avoids a nasty dependency on the regs-irq.h
file that is otherwise reserved for the interrupt controller
driver.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/tty/serial/serial_ks8695.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index b461d791188c..6c5e9900e69d 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -21,7 +21,6 @@
#include <asm/mach/irq.h>
#include <mach/regs-uart.h>
-#include <mach/regs-irq.h>
#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -52,8 +51,6 @@
#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
-#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
-
#define UART_DUMMY_LSR_RX 0x100
#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
@@ -207,7 +204,6 @@ static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
unsigned int count;
if (port->x_char) {
- KS8695_CLR_TX_INT();
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
@@ -221,7 +217,6 @@ static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
count = 16; /* fifo size */
while (!uart_circ_empty(xmit) && (count-- > 0)) {
- KS8695_CLR_TX_INT();
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
--
2.20.0
