Re: [PATCH v2] serial: sh-sci: Support for HSCIF RX sampling point adjustment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28.03.2019 11:16, Dirk Behme wrote:
Hi Geert,

On 28.03.2019 10:24, Geert Uytterhoeven wrote:
Hi Eugeniu,

On Wed, Mar 27, 2019 at 7:36 PM Eugeniu Rosca <erosca@xxxxxxxxxxxxxx> wrote:
We've recently switched from rcar-3.7.x to rcar-3.9.x [1] kernel and the
latter contains this patch [2] by virtue of rcar-3.9.0 commit [3], which
mirrors v4.18-rc1 commit [4] in mainline.

JFYI, quite far away in the delivery chain, we've received below report:

With this patch [2-4] there are reports about broken data
communication with 115200 baud with SXM module. Reverting
this patch results in successful communication, again.

While this scarce information barely helps anybody, I thought that
sharing it with you might be beneficial in case you collect several
reports linked to this specific commit in future, meaning it potentially
adds a regression.

Also, if you are aware of any userland changes that might be
required/assumed by this patch or in case you have any alternative
ideas how to avoid reverting this patch, your feedback would be very
appreciated.

Thanks for your report!

[TLDR: skip to the suggested fix below; I only noticed the bug after
        writing the below paragraphs, which are still useful questions to
        let us reproduce the issue]

Which SoC are you using?
I assume this is on a custom board, as Salvator-X(S) and ULCB have
external SCIF clock crystals, which allow to use a perfect 115200 bps,
hence the affected code path is not exercised:

     sh-sci e6550000.serial: BRG: 115200+0 bps using DL 4 SR 32
     sh-sci e6550000.serial: Using clk scif for 115200+0 bps

Does your board have an external SCIF clock? Which frequency?
Can you check the clock values and deviation for your configuration, by
changing the calls to print the above information from dev_dbg() to
dev_info()?

Does adding the DIV_ROUND_CLOSEST(), as suggested in my review
of the posted patch, help?
Perhaps the sampling point shift is inverted? Does -shift work better?

[possible solution]

+                               int shift = min(-8, max(7, deviation / 2));

Oops, min and max are exchanged!

I guess using

     int shift = clamp(deviation / 2, -8, 7)

instead fixes the issue?


Uh, that was fast :) Many thanks!

We will test this as fast as possible! But due to the long delivery chain Eugeniu mentioned this will take some time. I'll try my best to come back to you as fast as possible.


Just for the archives: We are testing the attached patch.


Best regards

Dirk



From 32cde852a03fa7fbb450d5665785b1ff390d3867 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Date: Thu, 28 Mar 2019 12:10:58 +0100
Subject: [PATCH] serial: sh-sci: Fix HSCIF RX sampling point adjustment

In commit 63ba1e00f178 ("serial: sh-sci: Support for HSCIF RX sampling
point adjustment") min and max are exchanged. Fix this.

Fixes: 	63ba1e00f178 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment")
Cc: <stable@xxxxxxxxxxxxxxx> # v4.18+
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
---
 drivers/tty/serial/sh-sci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index eba08cd892e5..69896d586a29 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2446,7 +2446,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 				 * last stop bit; we can increase the error
 				 * margin by shifting the sampling point.
 				 */
-				int shift = min(-8, max(7, deviation / 2));
+				int shift = clamp(deviation / 2, -8, 7);
 
 				hssrr |= (shift << HSCIF_SRHP_SHIFT) &
 					 HSCIF_SRHP_MASK;
-- 
2.20.0


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux