From: Lanqing Liu <lanqing.liu@xxxxxxxxxxxxxx> On Spreadtrum's serial device, nearly all of interrupts would be cleared by hardware except timeout interrupt. This patch removed the operation of clearing all interrupt in irq handler, instead added an if statement to check if the timeout interrupt is supposed to be cleared. Wrongly clearing timeout interrupt would lead to uart data stay in rx fifo, that means the driver cannot read them out anymore. Signed-off-by: Lanqing Liu <lanqing.liu@xxxxxxxxxxxxxx> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> (cherry picked from commit 4350782570b919f254c1e083261a21c19fcaee90) Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- drivers/tty/serial/sprd_serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 176f0a2bf9d9..c894eca57e73 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -63,6 +63,7 @@ /* interrupt clear register */ #define SPRD_ICLR 0x0014 +#define SPRD_ICLR_TIMEOUT BIT(13) /* line control register */ #define SPRD_LCR 0x0018 @@ -298,7 +299,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) return IRQ_NONE; } - serial_out(port, SPRD_ICLR, ~0); + if (ims & SPRD_IMSR_TIMEOUT) + serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT)) -- 2.20.0
