Re: [PATCH] tty: atmel_serial: fix a NULL pointer dereference

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Good catch !
Le 14/03/2019 à 08:17, Kangjie Lu a écrit :
> In case dmaengine_prep_dma_cyclic fails, the fix return a proper
> error code to avoid NULL pointer dereference.
> 
you could add:
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
So that -stable branches get this.

> Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>
> ---
>  drivers/tty/serial/atmel_serial.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 05147fe24343..cf560d05008c 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1237,8 +1237,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
>  	dma_cap_set(DMA_CYCLIC, mask);
>  
>  	atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
> -	if (atmel_port->chan_rx == NULL)
> +	if (atmel_port->chan_rx == NULL) {
> +		ret = -EINVAL;
>  		goto chan_err;
> +	}
>  	dev_info(port->dev, "using %s for rx DMA transfers\n",
>  		dma_chan_name(atmel_port->chan_rx));
>  
> @@ -1257,6 +1259,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
>  
>  	if (!nent) {
>  		dev_dbg(port->dev, "need to release resource of dma\n");
> +		ret = -EINVAL;
>  		goto chan_err;
>  	} else {
>  		dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
> @@ -1288,6 +1291,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
>  					 sg_dma_len(&atmel_port->sg_rx)/2,
>  					 DMA_DEV_TO_MEM,
>  					 DMA_PREP_INTERRUPT);
> +	if (!desc) {
> +		dev_err(port->dev, "Preparing DMA cyclic failed\n");
> +		ret = -ENOMEM;
IMHO, we don't really know why dmaengine_prep_dma_cyclic() failed, it
could be because it's already in use, or bad value, or...
(and anyway, we just check if the return value is < 0 in atmel _startup.)
Is there a specific reason you choose -ENOMEM ?
If not, maybe keeping this patch smaller with a simple dev_err()+goto
here would be a better choice.

> +		goto chan_err;
> +	}
>  	desc->callback = atmel_complete_rx_dma;
>  	desc->callback_param = port;
>  	atmel_port->desc_rx = desc;
> @@ -1300,7 +1308,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
>  	atmel_port->use_dma_rx = 0;
>  	if (atmel_port->chan_rx)
>  		atmel_release_rx_dma(port);
> -	return -EINVAL;
> +	return ret;
>  }
>  
>  static void atmel_uart_timer_callback(struct timer_list *t)
> 

Thanks !

Richard.



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux