Re: Serial console is causing system lock-up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 12 Mar 2019, John Ogness wrote:

> > But it doesn't turn SMP system into UP.
> 
> In this example it turned it into a brick.
> 
> The problems I see are:
> 
> 1. The current loglevels used in the kernel are not sufficient to
>    distinguish between emergency and informational messages. Addressing
>    this issue may require things like using a new printk flag and
>    manually marking the printks that we(?) decide are critical. I was

It depends on what the user considers important. The kernel doesn't know 
what's critical and can't know it.

For example, if the user plugs an USB stick and the USB stick reports an 
I/O error, it is not critical condition.

If the user runs the whole system from the USB stick and the USB stick 
reports an I/O error, it is critical condition.

The filesystems and the block device drivers can't know if the data stored 
on them are important.

Mikulas



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux