Re: [PATCH serial v2] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 11, 2019 at 05:12:03PM +0800, maowenan wrote:
> 
> 
> On 2019/3/11 15:46, Dan Carpenter wrote:
> > On Sat, Mar 09, 2019 at 10:50:37AM +0800, Mao Wenan wrote:
> >> Add the missing uart_unregister_driver() and i2c_del_driver() before return
> >> from sc16is7xx_init() in the error handling case.
> >>
> >> Reviewed-by: Vladimir Zapolskiy <vz@xxxxxxxxx>
> >> Signed-off-by: Mao Wenan <maowenan@xxxxxxxxxx>
> >> ---
> >>  v1->v2: fix compile warning if CONFIG_SERIAL_SC16IS7XX_SPI is not exist.
> >>  drivers/tty/serial/sc16is7xx.c | 14 ++++++++++++--
> >>  1 file changed, 12 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> >> index 268098681856..b9e5941ce767 100644
> >> --- a/drivers/tty/serial/sc16is7xx.c
> >> +++ b/drivers/tty/serial/sc16is7xx.c
> >> @@ -1509,7 +1509,7 @@ static int __init sc16is7xx_init(void)
> >>  	ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
> >>  	if (ret < 0) {
> >>  		pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
> >> -		return ret;
> >> +		goto err_i2c;
> >>  	}
> >>  #endif
> >>  
> >> @@ -1517,10 +1517,20 @@ static int __init sc16is7xx_init(void)
> >>  	ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
> >>  	if (ret < 0) {
> >>  		pr_err("failed to init sc16is7xx spi --> %d\n", ret);
> >> -		return ret;
> >> +		goto err_spi;
> >>  	}
> >>  #endif
> >>  	return ret;
> >> +
> >> +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
> >> +err_spi:
> >> +#endif
> >> +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
> >> +	i2c_del_driver(&sc16is7xx_i2c_uart_driver);
> >> +err_i2c:
> >> +#endif
> >> +	uart_unregister_driver(&sc16is7xx_uart);
> >> +	return ret;
> > 
> > This is quite ulgy.  Why not create two functions:
> > 
> > diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> > index 635178cf3eed..9986cb2479ad 100644
> > --- a/drivers/tty/serial/sc16is7xx.c
> > +++ b/drivers/tty/serial/sc16is7xx.c
> > @@ -1491,6 +1491,21 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = {
> >  	.id_table	= sc16is7xx_i2c_id_table,
> >  };
> >  
> > +static int __init register_sc16is7xx_i2c(void)
> > +{
> > +	return i2c_add_driver(&sc16is7xx_i2c_uart_driver);
> > +}
> > +
> > +static void __exit del_sc16is7xx_i2c(void)
> > +{
> > +	i2c_del_driver(&sc16is7xx_i2c_uart_driver);
> > +}
> > +
> > +#else
> > +
> > +static int __init register_sc16is7xx_i2c(void) { return 0; }
> > +static void __exit del_sc16is7xx_i2c(void) {}
> > +
> >  #endif
> >  
> >  static int __init sc16is7xx_init(void)
> > 
> > Then you can remove all the ifdefs.
> ok, thank you, I will send v3. Do you mind Reviewed-by ?

I'll add after I review the patch.  :)

regards,
dan carpenter




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux