Use u32 rather than unsigned long for register variables for clarity and
consistency.
Signed-off-by: Ryan Case <ryandcase@xxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
---
Changes in v2:
- Updated commit message
- Updated missed rxstale variable
drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 626bf7d399aa..6d8a44c12596 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -760,12 +760,12 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
{
- unsigned int m_irq_status;
- unsigned int s_irq_status;
- unsigned int geni_status;
+ u32 m_irq_en;
+ u32 m_irq_status;
+ u32 s_irq_status;
+ u32 geni_status;
struct uart_port *uport = dev;
unsigned long flags;
- unsigned int m_irq_en;
bool drop_rx = false;
struct tty_port *tport = &uport->state->port;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
@@ -844,7 +844,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
static int qcom_geni_serial_port_setup(struct uart_port *uport)
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- unsigned int rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
+ u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
u32 proto;
if (uart_console(uport)) {
@@ -943,14 +943,14 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
struct ktermios *termios, struct ktermios *old)
{
unsigned int baud;
- unsigned int bits_per_char;
- unsigned int tx_trans_cfg;
- unsigned int tx_parity_cfg;
- unsigned int rx_trans_cfg;
- unsigned int rx_parity_cfg;
- unsigned int stop_bit_len;
+ u32 bits_per_char;
+ u32 tx_trans_cfg;
+ u32 tx_parity_cfg;
+ u32 rx_trans_cfg;
+ u32 rx_parity_cfg;
+ u32 stop_bit_len;
unsigned int clk_div;
- unsigned long ser_clk_cfg;
+ u32 ser_clk_cfg;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
unsigned long clk_rate;
--
2.20.1.97.g81188d93c3-goog
