Hi,
This patchset adds support for the ISO7816 standard. The USART devices
in Microchip SoCs have an ISO7816 mode. It allows to let the USART
managing the CLK and I/O signals of a smart card.
Changes:
- v5
- rebase on tty-next.
- add documentation for the new ioctls (mimic rs485 one).
- fix a switch/case identation
- v4
- use the IP version number instead of the compatible string to set
min and max values for fidi.
- remove a useless macro for fidi.
- v3
- add IOCTLs to parisc arch.
- rework atmel_config_iso7816 according to the comments by Richard.
- keep max iteration hard coded. Will see later if the user need to
set this value. It may also concern the normal/inverse mode.
- improve the checking of the value from the user space.
- v2
- uart_get_iso7816_config: check there is an iso7816_config function.
- use IOCTL macros to generate the IOCTL number.
- check that reserved field is not used.
- remove debug logs.
- check that the iso7816_config is right before doing any action.
- change the error from nack and max iteration status to a debug
message.
- remove patch 3 as it concerns both rs485 and iso7816 to think more
about the need of adding a lock or not.
Nicolas Ferre (2):
tty/serial_core: add ISO7816 infrastructure
tty/serial: atmel: add ISO7816 support
Documentation/serial/serial-iso7816.txt | 83 ++++++++++++++
arch/alpha/include/uapi/asm/ioctls.h | 2 +
arch/mips/include/uapi/asm/ioctls.h | 2 +
arch/parisc/include/uapi/asm/ioctls.h | 2 +
arch/powerpc/include/uapi/asm/ioctls.h | 2 +
arch/sh/include/uapi/asm/ioctls.h | 2 +
arch/sparc/include/uapi/asm/ioctls.h | 2 +
arch/xtensa/include/uapi/asm/ioctls.h | 2 +
drivers/tty/serial/atmel_serial.c | 190 ++++++++++++++++++++++++++++++--
drivers/tty/serial/atmel_serial.h | 3 +-
drivers/tty/serial/serial_core.c | 60 ++++++++++
include/linux/serial_core.h | 3 +
include/uapi/asm-generic/ioctls.h | 2 +
include/uapi/linux/serial.h | 17 +++
14 files changed, 360 insertions(+), 12 deletions(-)
create mode 100644 Documentation/serial/serial-iso7816.txt
--
2.12.2
