[PATCH 06/14] serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32

[Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>]

Previous implementation uses platform-dependent functions
ltq_w32()/ltq_r32() to access registers. Those functions are not
available for other SoC which uses the same IP.
Change to OS provided readl()/writel() and readb()/writeb(), so
that different SoCs can use the same driver.

Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
---

 drivers/tty/serial/lantiq.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 4c14608b8ef8..e351f80996d3 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -145,7 +145,7 @@ lqasc_start_tx(struct uart_port *port)
 static void
 lqasc_stop_rx(struct uart_port *port)
 {
-	ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+	writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
 }
 
 static int
@@ -154,11 +154,11 @@ lqasc_rx_chars(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 	unsigned int ch = 0, rsr = 0, fifocnt;
 
-	fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+	fifocnt = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
 	while (fifocnt--) {
 		u8 flag = TTY_NORMAL;
-		ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
-		rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+		ch = readb(port->membase + LTQ_ASC_RBUF);
+		rsr = (readl(port->membase + LTQ_ASC_STATE)
 			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
 		tty_flip_buffer_push(tport);
 		port->icount.rx++;
@@ -218,10 +218,10 @@ lqasc_tx_chars(struct uart_port *port)
 		return;
 	}
 
-	while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+	while (((readl(port->membase + LTQ_ASC_FSTAT) &
 		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
 		if (port->x_char) {
-			ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+			writeb(port->x_char, port->membase + LTQ_ASC_TBUF);
 			port->icount.tx++;
 			port->x_char = 0;
 			continue;
@@ -230,7 +230,7 @@ lqasc_tx_chars(struct uart_port *port)
 		if (uart_circ_empty(xmit))
 			break;
 
-		ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+		writeb(port->state->xmit.buf[port->state->xmit.tail],
 			port->membase + LTQ_ASC_TBUF);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
@@ -246,7 +246,7 @@ lqasc_tx_int(int irq, void *_port)
 	unsigned long flags;
 	struct uart_port *port = (struct uart_port *)_port;
 	spin_lock_irqsave(&ltq_asc_lock, flags);
-	ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+	writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
 	spin_unlock_irqrestore(&ltq_asc_lock, flags);
 	lqasc_start_tx(port);
 	return IRQ_HANDLED;
@@ -271,7 +271,7 @@ lqasc_rx_int(int irq, void *_port)
 	unsigned long flags;
 	struct uart_port *port = (struct uart_port *)_port;
 	spin_lock_irqsave(&ltq_asc_lock, flags);
-	ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+	writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
 	lqasc_rx_chars(port);
 	spin_unlock_irqrestore(&ltq_asc_lock, flags);
 	return IRQ_HANDLED;
@@ -281,7 +281,7 @@ static unsigned int
 lqasc_tx_empty(struct uart_port *port)
 {
 	int status;
-	status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+	status = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
 	return status ? 0 : TIOCSER_TEMT;
 }
 
@@ -314,12 +314,12 @@ lqasc_startup(struct uart_port *port)
 	asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
 		port->membase + LTQ_ASC_CLC);
 
-	ltq_w32(0, port->membase + LTQ_ASC_PISEL);
-	ltq_w32(
+	writel(0, port->membase + LTQ_ASC_PISEL);
+	writel(
 		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
 		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
 		port->membase + LTQ_ASC_TXFCON);
-	ltq_w32(
+	writel(
 		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
 		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
 		port->membase + LTQ_ASC_RXFCON);
@@ -351,7 +351,7 @@ lqasc_startup(struct uart_port *port)
 		goto err2;
 	}
 
-	ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+	writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
 		port->membase + LTQ_ASC_IRNREN);
 	return 0;
 
@@ -370,7 +370,7 @@ lqasc_shutdown(struct uart_port *port)
 	free_irq(ltq_port->rx_irq, port);
 	free_irq(ltq_port->err_irq, port);
 
-	ltq_w32(0, port->membase + LTQ_ASC_CON);
+	writel(0, port->membase + LTQ_ASC_CON);
 	asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
 		port->membase + LTQ_ASC_RXFCON);
 	asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
@@ -462,13 +462,13 @@ lqasc_set_termios(struct uart_port *port,
 	asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
 
 	/* now we can write the new baudrate into the register */
-	ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+	writel(divisor, port->membase + LTQ_ASC_BG);
 
 	/* turn the baudrate generator back on */
 	asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON);
 
 	/* enable rx */
-	ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+	writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
 
 	spin_unlock_irqrestore(&ltq_asc_lock, flags);
 
@@ -579,10 +579,10 @@ lqasc_console_putchar(struct uart_port *port, int ch)
 		return;
 
 	do {
-		fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+		fifofree = (readl(port->membase + LTQ_ASC_FSTAT)
 			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
 	} while (fifofree == 0);
-	ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+	writeb(ch, port->membase + LTQ_ASC_TBUF);
 }
 
 static void lqasc_serial_port_write(struct uart_port *port, const char *s,
-- 
2.11.0