When a serial port gets faulty or gets flooded with inputs, its interrupt
handler starts to work double time to get the characters to the workqueue
for the tty layer to handle them. When this busy time on the serial/tty
subsystem happens during boot, where it is also busy on the userspace
trying to initialise, some processes can continuously get preempted
and will be on hold until the interrupts subside.
The fix is to backoff on processing received characters for a specified
amount of time when an input overrun is seen (received a new character
before the previous one is processed). This only stops receive and will
continue to transmit characters to serial port. After the backoff period
is done, it receive will be re-enabled. This is optional and will only
be enabled by setting 'overrun-throttle-ms' in the dts.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Darwin Dingel <darwin.dingel@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 25 +++++++++++++++++++++++++
drivers/tty/serial/8250/8250_fsl.c | 23 ++++++++++++++++++++++-
drivers/tty/serial/8250/8250_of.c | 5 +++++
include/linux/serial_8250.h | 4 ++++
4 files changed, 56 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 8fe3d0ed229e..0e65d4261f94 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -946,6 +946,21 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
return NULL;
}
+static void serial_8250_overrun_backoff_work(struct work_struct *work)
+{
+ struct uart_8250_port *up =
+ container_of(to_delayed_work(work), struct uart_8250_port,
+ overrun_backoff);
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ up->ier |= UART_IER_RLSI | UART_IER_RDI;
+ up->port.read_status_mask |= UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
/**
* serial8250_register_8250_port - register a serial port
* @up: serial port template
@@ -1060,6 +1075,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
ret = 0;
}
}
+
+ /* Initialise interrupt backoff work if required */
+ if (up->overrun_backoff_time_ms > 0) {
+ uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
+ INIT_DELAYED_WORK(&uart->overrun_backoff,
+ serial_8250_overrun_backoff_work);
+ } else {
+ uart->overrun_backoff_time_ms = 0;
+ }
+
mutex_unlock(&serial_mutex);
return ret;
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 6640a4c7ddd1..bb9571eed275 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -45,8 +45,29 @@ int fsl8250_handle_irq(struct uart_port *port)
lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
- if (lsr & (UART_LSR_DR | UART_LSR_BI))
+ /* Process incoming characters first */
+ if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
+ (up->ier & (UART_IER_RLSI | UART_IER_RDI))) {
lsr = serial8250_rx_chars(up, lsr);
+ }
+
+ /* Stop processing interrupts on input overrun */
+ if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+ unsigned long delay;
+
+ up->ier = port->serial_in(port, UART_IER);
+ if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+ port->ops->stop_rx(port);
+ } else {
+ /* Keep restarting the timer until
+ * the input overrun subsides.
+ */
+ cancel_delayed_work(&up->overrun_backoff);
+ }
+
+ delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+ schedule_delayed_work(&up->overrun_backoff, delay);
+ }
serial8250_modem_status(up);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index af8beefe9b5c..2a3244067ed6 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -236,6 +236,11 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control"))
port8250.capabilities |= UART_CAP_AFE;
+ if (of_property_read_u32(ofdev->dev.of_node,
+ "overrun-throttle-ms",
+ &port8250.overrun_backoff_time_ms) != 0)
+ port8250.overrun_backoff_time_ms = 0;
+
ret = serial8250_register_8250_port(&port8250);
if (ret < 0)
goto err_dispose;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 18e21427bce4..5a655ba8d273 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -134,6 +134,10 @@ struct uart_8250_port {
void (*dl_write)(struct uart_8250_port *, int);
struct uart_8250_em485 *em485;
+
+ /* Serial port overrun backoff */
+ struct delayed_work overrun_backoff;
+ u32 overrun_backoff_time_ms;
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
--
2.18.0
