Re: [PATCH] serial: 8250_of: Fix for lack of interrupt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/08/2018 16:07, John Garry wrote:
In commit c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ"), a
check was added for the UART driver being probed prior to the parent IRQ
controller.

Unfortunately this breaks certain boards which have no interrupt support,
like Huawei D03.

Indeed, the 8250 DT bindings state that interrupts should be supported -
not must.

To fix, switch from irq_of_parse_and_map() to of_irq_get(), which
does relay whether the IRQ host controller domain is not ready, i.e.
defer probe, instead of assuming it.

Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
Note: I think that it would better if we could try to get the interrupt
	  before clk+pm enabling, so we don't need to disable later when
	  deferring, but this is not a fix.

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index af8beef..c370e776 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -58,7 +58,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	struct resource resource;
 	struct device_node *np = ofdev->dev.of_node;
 	u32 clk, spd, prop;
-	int ret;
+	int ret, irq;

 	memset(port, 0, sizeof *port);

@@ -143,21 +143,27 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (ret >= 0)
 		port->line = ret;

-	port->irq = irq_of_parse_and_map(np, 0);
-	if (!port->irq) {
-		ret = -EPROBE_DEFER;
-		goto err_unprepare;
+	irq = of_irq_get(np, 0);
+	if (irq < 0) {
+		if (port->irq == -EPROBE_DEFER) {

This check is not corrrct. It should be:
		if (irq == -EPROBE_DEFER) {

I'll send a v2.

@Alexander Sverdlin, Can you test this also please?

Thanks,
John

+			ret = -EPROBE_DEFER;
+			goto err_unprepare;
+		}
+		/* IRQ support not mandatory */
+		irq = 0;
 	}

+	port->irq = irq;
+
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
 	if (IS_ERR(info->rst)) {
 		ret = PTR_ERR(info->rst);
-		goto err_dispose;
+		goto err_unprepare;
 	}

 	ret = reset_control_deassert(info->rst);
 	if (ret)
-		goto err_dispose;
+		goto err_unprepare;

 	port->type = type;
 	port->uartclk = clk;
@@ -184,8 +190,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		port->handle_irq = fsl8250_handle_irq;

 	return 0;
-err_dispose:
-	irq_dispose_mapping(port->irq);
 err_unprepare:
 	clk_disable_unprepare(info->clk);
 err_pmruntime:






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux