Re: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tuesday 28 August 2018 06:52 AM, Nishanth Menon wrote:
> On 15:55-20180827, Tony Lindgren wrote:
>> * Kishon Vijay Abraham I <kishon@xxxxxx> [180827 03:06]:
>>> Hi Tony,
>>>
>>> On Monday 20 August 2018 08:01 PM, Tony Lindgren wrote:
>>>> * Kishon Vijay Abraham I <kishon@xxxxxx> [180808 06:35]:
>>>>> On Tuesday 05 June 2018 07:35 PM, Rob Herring wrote:
>>>>>> Really need 64-bit addresses and sizes? Use ranges to limit the
>>>>>> address space if possible.
>>>>>
>>>>> We now have address-cells as <1>,
>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-am65.dtsi#n49
>>>>>
>>>>> However each PCIe instance has 2 data regions and one of the regions
>>>>> (PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1/PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 specified
>>>>> in the "MAIN Domain Memory Map" table of TRM http://www.ti.com/lit/pdf/spruid7)
>>>>> is above the 32bit region and requires 2 cells to specify the start address.
>>>>> This region is used to access MEM_SPACE of PCIe endpoint when operating in root
>>>>> complex mode and access memory of PCI root complex when operating in endpoint mode.
>>>>>
>>>>> In order to describe this, should we change the address-cells back to <2> or do
>>>>> you suggest any other alternatives?
>>>>
>>>> It's probably best to have the top level cbass interconnect use
>>>> #size-cells = <2> and then have it's child interconnects have
>>>> #size-cells = <1> if they don't need ranges above 4GB.
>>>
>>> PCIe has a region starting at 0x40_00000000 and size 4GB. We need 2 address
>>> cells and 2 size cells to describe this no?
>>
>> Yes.
>>
>>>> BTW, what's the difference between all these three similar PCIE
>>>> ranges?
>>>>
>>>> PCIE0_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005500000 0x0005600000 1 MB
>>>> PCIE1_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005600000 0x0005700000 1 MB
>>>
>>> This is the register space for the two instances of PCIe controller.
>>>>
>>>> PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0010000000 0x0018000000 128 MB
>>>> PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0018000000 0x0020000000 128 MB
>>>>
>>>> PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4000000000 0x4100000000 4 GB
>>>> PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4100000000 0x4200000000 4 GB
>>>
>>> The above are regions which can be used by CPU/DMA to access the PCIe address
>>> space. The mapping from the above regions to the PCIe address space will be
>>> programmed in the PCIe controller.
>>
>> OK so not just somethng for dma-ranges but also accessible by
>> the CPU.
>>
> 
> Kishon, Sekhar:
> 
> Can you guys post patches based on v4.19-rc1 for fixing this? I do have
> a bunch of dts nodes to build as well for v4.20, once Tony / Rob acks the
> changes.

Sure, I'll post that today.

Thanks
Kishon



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux