Re: [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-08-21 01:43, Janusz Krzysztofik wrote:
> Most users of get/set array functions iterate consecutive bits of data,
> usually a single integer, while or processing array of results obtained
> from or building an array of values to be passed to those functions.
> Save time wasted on those iterations by changing the functions' API to
> accept bitmaps.
> 
> All current users are updated as well.
> 
> More benefits from the change are expected as soon as planned support
> for accepting/passing those bitmaps directly from/to respective GPIO
> chip callbacks if applicable is implemented.
> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
> ---
>  Documentation/driver-api/gpio/consumer.rst  | 22 ++++----
>  drivers/auxdisplay/hd44780.c                | 52 +++++++++--------
>  drivers/bus/ts-nbus.c                       | 19 ++-----
>  drivers/gpio/gpio-max3191x.c                | 17 +++---
>  drivers/gpio/gpiolib.c                      | 86 +++++++++++++++--------------
>  drivers/gpio/gpiolib.h                      |  4 +-
>  drivers/i2c/muxes/i2c-mux-gpio.c            |  3 +-
>  drivers/mmc/core/pwrseq_simple.c            | 13 ++---
>  drivers/mux/gpio.c                          |  4 +-
>  drivers/net/phy/mdio-mux-gpio.c             |  3 +-
>  drivers/pcmcia/soc_common.c                 | 11 ++--
>  drivers/phy/motorola/phy-mapphone-mdm6600.c | 17 +++---
>  drivers/staging/iio/adc/ad7606.c            |  9 +--
>  drivers/tty/serial/serial_mctrl_gpio.c      |  7 ++-
>  include/linux/gpio/consumer.h               | 18 +++---
>  15 files changed, 138 insertions(+), 147 deletions(-)
> 

*snip*

> diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
> index 401308e3d036..d675e0ca2fa4 100644
> --- a/drivers/i2c/muxes/i2c-mux-gpio.c
> +++ b/drivers/i2c/muxes/i2c-mux-gpio.c
> @@ -27,13 +27,14 @@ struct gpiomux {
>  
>  static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
>  {
> +	unsigned long value_bitmap[1] = { val, };
>  	int i;
>  
>  	for (i = 0; i < mux->data.n_gpios; i++)
>  		mux->values[i] = (val >> i) & 1;
>  
>  	gpiod_set_array_value_cansleep(mux->data.n_gpios,
> -				       mux->gpios, mux->values);
> +				       mux->gpios, value_bitmap);
>  }
>  
>  static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)

Please take the opportunity to completely get rid of the values member
in struct mux_gpio. It no longer serves any purpose.

*snip*

> diff --git a/drivers/mux/gpio.c b/drivers/mux/gpio.c
> index 6fdd9316db8b..cc2d5f50472a 100644
> --- a/drivers/mux/gpio.c
> +++ b/drivers/mux/gpio.c
> @@ -23,14 +23,14 @@ struct mux_gpio {
>  static int mux_gpio_set(struct mux_control *mux, int state)
>  {
>  	struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
> +	unsigned long value_bitmap[1] = { state, };
>  	int i;
>  
>  	for (i = 0; i < mux_gpio->gpios->ndescs; i++)
>  		mux_gpio->val[i] = (state >> i) & 1;
>  
>  	gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
> -				       mux_gpio->gpios->desc,
> -				       mux_gpio->val);
> +				       mux_gpio->gpios->desc, value_bitmap);
>  
>  	return 0;
>  }

Dito (but the member name is val).

*snip*

Cheers,
Peter



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux