On Tue, Jun 12, 2018 at 02:11:44PM +0200, Stefan Agner wrote:
> On 07.06.2018 09:56, Uwe Kleine-König wrote:
> > On Fri, Apr 20, 2018 at 02:44:07PM +0200, Stefan Agner wrote:
> >> To reset the UART the SRST needs be cleared (low active). According
> >> to the documentation the bit will remain active for 4 module clocks
> >> until it is cleared (set to 1).
> >>
> >> Hence the real register need to be read in case the cached register
> >> indicates that the SRST bit is zero.
> >>
> >> This bug lead to wrong baudrate because the baud rate register got
> >> restored before reset completed in imx_flush_buffer.
> >>
> >> Fixes: 3a0ab62f43de ("serial: imx: implement shadow registers for UCRx and UFCR")
> >> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> >> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx>
> >> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> >
> > For the record, there is a customer of mine who reports that this commit
> > breaks rs485 communication on i.MX25 because RTS stops to toggle as
> > intended.
> >
> > (Some details: uart3, fsl,uart-has-rtscts, fsl,dte-mode,
> > linux,rs485-enabled-at-boot-time, native RTS.)
> >
> > I didn't debug this yet.
>
> I have seen your patch today "serial: imx: fix comment about UCR2_SRST
> and its handling for shadowing" so I assume you looked into this issue?
>
> Was it related to that change?
I started looking into this issue, but didn't find the culprit yet.
My work in progress patch looks as follows:
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 758a67f3c8b3..5270173721c6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1357,6 +1357,12 @@ static int imx_uart_startup(struct uart_port *port)
while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
+ if (imx_uart_readl(sport, UCR2) & UCR2_SRST) {
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ dev_warn(port->dev, "SRST didn't go away\n");
+ return -EIO;
+ }
+
/*
* Finally, clear and enable interrupts
*/
which seems to trigger on both i.MX25 and i.MX6 at least occasionally.
Maybe 100 us is too short?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
