On Fri, Apr 20, 2018 at 02:44:07PM +0200, Stefan Agner wrote:
> To reset the UART the SRST needs be cleared (low active). According
> to the documentation the bit will remain active for 4 module clocks
> until it is cleared (set to 1).
>
> Hence the real register need to be read in case the cached register
> indicates that the SRST bit is zero.
>
> This bug lead to wrong baudrate because the baud rate register got
> restored before reset completed in imx_flush_buffer.
>
> Fixes: 3a0ab62f43de ("serial: imx: implement shadow registers for UCRx and UFCR")
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx>
> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
For the record, there is a customer of mine who reports that this commit
breaks rs485 communication on i.MX25 because RTS stops to toggle as
intended.
(Some details: uart3, fsl,uart-has-rtscts, fsl,dte-mode,
linux,rs485-enabled-at-boot-time, native RTS.)
I didn't debug this yet.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
