[PATCH 2/5] serial: imx: rename variables to match the register names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now the variable holding the value of register USR1 is called usr1
instead of sts which is more straight forward. The same is also done for
sts2 which is called usr2 now.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 drivers/tty/serial/imx.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 1efa53fbc124..001a099b68a9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -758,27 +758,26 @@ static void imx_mctrl_check(struct imx_port *sport)
 static irqreturn_t imx_int(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	unsigned int sts;
-	unsigned int sts2;
+	unsigned int usr1, usr2;
 	irqreturn_t ret = IRQ_NONE;
 
-	sts = readl(sport->port.membase + USR1);
-	sts2 = readl(sport->port.membase + USR2);
+	usr1 = readl(sport->port.membase + USR1);
+	usr2 = readl(sport->port.membase + USR2);
 
-	if (!sport->dma_is_enabled && (sts & (USR1_RRDY | USR1_AGTIM))) {
+	if (!sport->dma_is_enabled && (usr1 & (USR1_RRDY | USR1_AGTIM))) {
 		imx_rxint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
-	if ((sts & USR1_TRDY &&
+	if ((usr1 & USR1_TRDY &&
 	     readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) ||
-	    (sts2 & USR2_TXDC &&
+	    (usr2 & USR2_TXDC &&
 	     readl(sport->port.membase + UCR4) & UCR4_TCEN)) {
 		imx_txint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
-	if (sts & USR1_DTRD) {
+	if (usr1 & USR1_DTRD) {
 		unsigned long flags;
 
 		writel(USR1_DTRD, sport->port.membase + USR1);
@@ -790,17 +789,17 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 		ret = IRQ_HANDLED;
 	}
 
-	if (sts & USR1_RTSD) {
+	if (usr1 & USR1_RTSD) {
 		imx_rtsint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
-	if (sts & USR1_AWAKE) {
+	if (usr1 & USR1_AWAKE) {
 		writel(USR1_AWAKE, sport->port.membase + USR1);
 		ret = IRQ_HANDLED;
 	}
 
-	if (sts2 & USR2_ORE) {
+	if (usr2 & USR2_ORE) {
 		sport->port.icount.overrun++;
 		writel(USR2_ORE, sport->port.membase + USR2);
 		ret = IRQ_HANDLED;
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux