On 14 November 2017 at 12:02, James Hogan <james.hogan@xxxxxxxx> wrote:
> On Sun, Oct 29, 2017 at 04:27:21PM +0100, Jonas Gorski wrote:
>> Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
>> trigger I/F of FIFO buffers"), the port's default FCR value isn't used
>> in serial8250_do_set_termios anymore, but copied over once in
>> serial8250_config_port and then modified as needed.
>>
>> Unfortunately, serial8250_config_port will never be called if the port
>> is shared between kernel and userspace, and the port's flag doesn't have
>> UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
>>
>> This causes garbled output from userspace:
>>
>> [ 5.220000] random: procd urandom read with 49 bits of entropy available
>> ers
>> [kee
>>
>> Fix this by forcing it to be configured on boot, resulting in the
>> expected output:
>>
>> [ 5.250000] random: procd urandom read with 50 bits of entropy available
>> Press the [f] key and hit [enter] to enter failsafe mode
>> Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
>>
>> Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
>> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
>> ---
>> I'm not sure if this is just AR7's issue, or if this points to a general
>> issue for UARTs used as kernel console and login console with the "fixed"
>> commit.
>
> Thanks. Given nobody seems to have objected, I've applied to my
> mips-fixes branch, with stable tag for 3.17+.
Hmm, I don't see it in
https://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips.git/log/?h=mips-fixes
- did you maybe forget to push?
Regards
Jonas
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
