Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.
Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
This causes garbled output from userspace:
[ 5.220000] random: procd urandom read with 49 bits of entropy available
ers
[kee
Fix this by forcing it to be configured on boot, resulting in the
expected output:
[ 5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
---
I'm not sure if this is just AR7's issue, or if this points to a general
issue for UARTs used as kernel console and login console with the "fixed"
commit.
arch/mips/ar7/platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 4674f1efbe7a..e1675c25d5d4 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -575,7 +575,7 @@ static int __init ar7_register_uarts(void)
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
- uart_port.flags = UPF_FIXED_TYPE;
+ uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF;
uart_port.regshift = 2;
uart_port.line = 0;
--
2.13.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
