From: Allen Yan <yanwei@xxxxxxxxxxx> When receiving data on RX pin before ->uart_startup() is called, some error bits in the state register could be set up (like BRK_DET). This is harmless when using only the standard UART (error bits are read-only), but may procude an endless loop once in the extended UART RX interrupt handler (error bits must be cleared). Clear the status register in ->uart_startup() to avoid this situation. Signed-off-by: Allen Yan <yanwei@xxxxxxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/mvebu-uart.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 81a3d2714fd3..67f302748b78 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -322,6 +322,12 @@ static int mvebu_uart_startup(struct uart_port *port) writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, port->membase + UART_CTRL(port)); udelay(1); + + /* Clear the error bits of state register before IRQ request */ + ret = readl(port->membase + UART_STAT); + ret |= STAT_BRK_ERR; + writel(ret, port->membase + UART_STAT); + writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); ctl = readl(port->membase + UART_INTR(port)); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
