From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
We just got a common helper for parsing the rs485 specific
device tree properties. Use it and drop the open coded parser.
As a side effect this adds support for parsing rs485-rts-delay and
rs485-rx-during-tx. As the driver doesn't support this though, probing
fails if these are defined.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 849c1f9991ce..b1a5cb41e9be 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2223,6 +2223,24 @@ static int lpuart_probe(struct platform_device *pdev)
return ret;
}
+ of_get_rs485_mode(np, &sport->port.rs485);
+
+ if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
+ dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
+ return -ENOSYS;
+ }
+
+ if (sport->port.rs485.delay_rts_before_send ||
+ sport->port.rs485.delay_rts_after_send) {
+ dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
+ return -ENOSYS;
+ }
+
+ if (sport->port.rs485.flags & SER_RS485_ENABLED) {
+ sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
+ writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
+ }
+
sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
if (!sport->dma_tx_chan)
dev_info(sport->port.dev, "DMA tx channel request failed, "
@@ -2233,12 +2251,6 @@ static int lpuart_probe(struct platform_device *pdev)
dev_info(sport->port.dev, "DMA rx channel request failed, "
"operating without rx DMA\n");
- if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) {
- sport->port.rs485.flags |= SER_RS485_ENABLED;
- sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
- writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
- }
-
return 0;
}
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
