I shut off the T1650 onboard serial port and the same error occurred.
Dell T1650
Sealevel 7402 REV. D
[ 1.217782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.218020] serial 0000:03:02.0: 0000:03:02.0: Redundant entry in
serial pci_table.
Please send the output of lspci -vv, this
message (0x135e,0x7402,0x135e,0x7402), the
manufacturer and name of serial board or
modem board to <linux-serial@xxxxxxxxxxxxxxx>.
[ 1.238788] 0000:03:02.0: ttyS0 at I/O 0xd0b0 (irq = 18, base_baud =
115200) is a 16550A
[ 1.259362] 0000:03:02.0: ttyS1 at I/O 0xd0a0 (irq = 18, base_baud =
115200) is a 16550A
[ 1.279930] 0000:03:02.0: ttyS2 at I/O 0xd090 (irq = 18, base_baud =
115200) is a 16550A
[ 1.300509] 0000:03:02.0: ttyS3 at I/O 0xd080 (irq = 18, base_baud =
115200) is a 16550A
[ 1.300693] Linux agpgart interface v0.103
03:02.0 Serial controller: Sealevel Systems Inc Four Port RS-422/485
Interface (rev 01) (prog-if 02 [16550])
Subsystem: Sealevel Systems Inc Four Port RS-422/485 Interface
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at d000 [size=128]
Region 2: I/O ports at d0b0 [size=8]
Region 3: I/O ports at d0a0 [size=8]
Region 4: I/O ports at d090 [size=8]
Region 5: I/O ports at d080 [size=8]
Kernel driver in use: serial
Attachment:
log.tgz
Description: application/compressed-tar
