On Tue, Jul 18, 2017 at 11:49:44AM +0200, Linus Walleij wrote: > On Wed, Jul 12, 2017 at 5:51 PM, Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote: > > > From fab3a9a697e9797ba1c24874d7c43c09dd812e77 Mon Sep 17 00:00:00 2001 > > From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > Date: Wed, 12 Jul 2017 17:29:28 +0200 > > Subject: [PATCH] reset: make (de)assert report succeess for self-deasserting > > reset drivers > > > > By now there are drivers using shared reset controls and (de)assert > > calls on platforms with self-deasserting reset lines and thus reset > > drivers that do not implement .assert() and .deassert(). > > As long as the initial state of the reset line is deasserted, there > > is no reason for a reset_control_assert call to return an error for > > shared reset controls, or for a reset_control_deassert call to return > > an error for either shared or exclusive reset controls: after a call > > to reset_control_deassert the reset line is guaranteed to be deasserted, > > and after a call to reset_control_assert it is valid for the reset > > line to stay deasserted for shared reset controls. > > > > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > This patch makes all kind of sense, and I follow your > reasoning. > Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > > In the back of my head I was thinking that the deassert/assert > pair matches a certain SoC driver design pattern I have seen > around: > > When a driver use an IP block it enables the clock and takes > the block out of reset. > > When it stops using it, it asserts reset and disables the clock. > > This is not entirely self-evident, for example why is reset asserted > across say insmod/rmmod/insmod. Just disabling the clock would > be OK, I guess, in most cases. It is just one of those "dances" > that developers do, as if to clear the desk or something. > > But I guess there must be cases where doing things in another way > creates problems or power leaks. > > I would surely like to understand, from a silicon perspective, why > drivers are so often written like this. I could think of things like > little automata and gates inside the silicon that need to be reset > to minimize off-power consumption but I have no clue if it is > really so. At least doing it this way guarantees the hardware is in its initial state before the driver starts doing anything with it. Otherwise you would have to ensure the hw init sequence in the driver works for any hw state. That seems more complicated to me than just making sure it works correctly when the hw is in its initial stat, especially when there are DMA engines involved. Peter. -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
