From: Nandor Han <nandor.han@xxxxxx>
According to "Documentation/serial/driver" both procedures should stop
receiving or sending data. Based on this the procedures should stop the
activity regardless if DMA is enabled or not.
This commit updates both imx_stop_{rx|tx} procedures to stop the
activity and disable the interrupts related to that.
Signed-off-by: Nandor Han <nandor.han@xxxxxx>
Signed-off-by: Romain Perier <romain.perier@xxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3112d88..d35112f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -398,15 +398,14 @@ static void imx_stop_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- /*
- * We are maybe in the SMP context, so if the DMA TX thread is running
- * on other cpu, we have to wait for it to finish.
- */
- if (sport->dma_is_enabled && sport->dma_is_txing)
- return;
+ sport->tx_bytes = 0;
+
+ if (sport->dma_is_enabled)
+ imx_stop_tx_dma(sport);
temp = readl(port->membase + UCR1);
- writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1);
+ temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN | UCR1_RTSDEN);
+ writel(temp, port->membase + UCR1);
/* in rs485 mode disable transmitter if shifter is empty */
if (port->rs485.flags & SER_RS485_ENABLED &&
@@ -433,21 +432,20 @@ static void imx_stop_rx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- if (sport->dma_is_enabled && sport->dma_is_rxing) {
- if (sport->port.suspended) {
- dmaengine_terminate_all(sport->dma_chan_rx);
- sport->dma_is_rxing = 0;
- } else {
- return;
- }
- }
+ if (sport->dma_is_enabled)
+ imx_stop_rx_dma(sport);
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_RRDYEN;
+ writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR2);
- writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+ temp &= ~UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
- /* disable the `Receiver Ready Interrrupt` */
- temp = readl(sport->port.membase + UCR1);
- writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR3);
+ temp &= ~UCR3_AWAKEN;
+ writel(temp, sport->port.membase + UCR3);
}
/*
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
