Hello,
Le 03/07/2017 à 08:48, Uwe Kleine-König a écrit :
> Hello,
>
> On Fri, Jun 30, 2017 at 02:04:40PM +0200, Romain Perier wrote:
>> From: Nandor Han <nandor.han@xxxxxx>
>>
>> Avoid the situation when `dma_is_rxing` could incorrectly signal that
>> DMA RX channel is receiving data in case DMA preparation or sg mapping
>> fails.
> Just from reading the commit log and the patch I didn't understand the
> problem that is supposed to be fixed here. After looking at it for some
> I understood. I don't suggest a new commit log here as it has to look
> different if you pick up my comment below.
>
>> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> index 5437b34..1d35293 100644
>> --- a/drivers/tty/serial/imx.c
>> +++ b/drivers/tty/serial/imx.c
>> @@ -725,11 +725,11 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
>> return IRQ_HANDLED;
>> }
>>
>> -static void imx_disable_rx_int(struct imx_port *sport)
>> +static void imx_disable_rx_int(struct imx_port *sport, bool is_rxing)
>> {
>> unsigned long temp;
>>
>> - sport->dma_is_rxing = 1;
>> + sport->dma_is_rxing = is_rxing;
>>
>> /* disable the receiver ready and aging timer interrupts */
>> temp = readl(sport->port.membase + UCR1);
>> @@ -762,7 +762,7 @@ static void imx_dma_rxint(struct imx_port *sport)
>> temp = readl(sport->port.membase + USR2);
>> if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
>>
>> - imx_disable_rx_int(sport);
>> + imx_disable_rx_int(sport, false);
>>
>> /* tell the DMA to receive the data. */
>> start_rx_dma(sport);
>> @@ -1083,6 +1083,7 @@ static int start_rx_dma(struct imx_port *sport)
>> desc->callback_param = sport;
>>
>> dev_dbg(dev, "RX: prepare for the DMA.\n");
>> + sport->dma_is_rxing = 1;
>> sport->rx_cookie = dmaengine_submit(desc);
>> dma_async_issue_pending(chan);
>> return 0;
>> @@ -1362,7 +1363,7 @@ static int imx_startup(struct uart_port *port)
>> spin_unlock(&tty->files_lock);
>>
>> if (readcnt > 0) {
>> - imx_disable_rx_int(sport);
>> + imx_disable_rx_int(sport, true);
> I wonder if it would be saner to not assign to dma_is_rxing in
> imx_disable_rx_int() at all but do this only in start_rx_dma() and
> imx_dma_rxint().
It was "mostly" done, in 4.11 in fact. dma_is_rxing was set to 0 from
imx_dma_rxint() and was not set
at all from start_rx_dma(), resulting to the same issue. We could move
assignment of dma_is_rxing out of imx_disable_rx_int()
and set it to one from start_rx_dma() only. What do you think ?
Best Regards,
Romain
>
> Best regards
> Uwe
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
