Am 29.06.2017 um 22:10 schrieb Rob Herring: > On Tue, Jun 27, 2017 at 02:55:18AM +0200, Andreas Färber wrote: >> Add an initial binding for the RDA8810PL UART. >> >> Signed-off-by: Andreas Färber <afaerber@xxxxxxx> >> --- >> Documentation/devicetree/bindings/serial/rda-uart.txt | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/serial/rda-uart.txt >> >> diff --git a/Documentation/devicetree/bindings/serial/rda-uart.txt b/Documentation/devicetree/bindings/serial/rda-uart.txt >> new file mode 100644 >> index 000000000000..6840a8aee035 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/serial/rda-uart.txt >> @@ -0,0 +1,13 @@ >> +RDA Micro UART >> + >> +Required properties: >> +- compatible : "rda,8810pl-uart" for RDA8810PL >> +- reg : Offset and length of the register set for the device. > > No clocks or interrupts? Not yet. I've only pieced together an earlycon driver so far, no full serial driver. The .dtsi doesn't even have an interrupt-controller node yet - wasn't clear to me whether this SoC even has a GIC and, if so, where, from the downstream pre-DT code. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
