On 26/06/2017 at 11:07, Uwe Kleine-König wrote:
> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>
> We just got a common helper for parsing the rs485 specific
> device tree properties. Use it and drop the open coded parser.
>
> Note that there is a small difference between the removed and the now
> used implementation: The former cleared flags to 0 if rs485-rts-delay
> was given, the common helper clears SER_RS485_RX_DURING_TX and
> SER_RS485_ENABLED only but always which makes more sense.
Sure:
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Thanks Sasha and Uwe!
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> [ukleinek: point out semantic change in commit log]
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> ---
> drivers/tty/serial/atmel_serial.c | 25 +------------------------
> 1 file changed, 1 insertion(+), 24 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 937d67f22fba..245d9c227ad5 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1684,29 +1684,6 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
> }
> }
>
> -static void atmel_init_rs485(struct uart_port *port,
> - struct platform_device *pdev)
> -{
> - struct device_node *np = pdev->dev.of_node;
> -
> - struct serial_rs485 *rs485conf = &port->rs485;
> - u32 rs485_delay[2];
> -
> - /* rs485 properties */
> - if (of_property_read_u32_array(np, "rs485-rts-delay",
> - rs485_delay, 2) == 0) {
> - rs485conf->delay_rts_before_send = rs485_delay[0];
> - rs485conf->delay_rts_after_send = rs485_delay[1];
> - rs485conf->flags = 0;
> - }
> -
> - if (of_get_property(np, "rs485-rx-during-tx", NULL))
> - rs485conf->flags |= SER_RS485_RX_DURING_TX;
> -
> - if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
> - rs485conf->flags |= SER_RS485_ENABLED;
> -}
> -
> static void atmel_set_ops(struct uart_port *port)
> {
> struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
> @@ -2390,7 +2367,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
> atmel_init_property(atmel_port, pdev);
> atmel_set_ops(port);
>
> - atmel_init_rs485(port, pdev);
> + of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
>
> port->iotype = UPIO_MEM;
> port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
