From: Bich Hemon <bich.hemon@xxxxxx> Set last_res value in each port Signed-off-by: Bich Hemon <bich.hemon@xxxxxx> --- drivers/tty/serial/stm32-usart.c | 6 +++--- drivers/tty/serial/stm32-usart.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index a7401b0..c54b89d 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -155,14 +155,13 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded) unsigned long c; u32 sr; char flag; - static int last_res = RX_BUF_L; if (port->irq_wake) pm_wakeup_event(tport->tty->dev, 0); - while (stm32_pending_rx(port, &sr, &last_res, threaded)) { + while (stm32_pending_rx(port, &sr, &stm32_port->last_res, threaded)) { sr |= USART_SR_DUMMY_RX; - c = stm32_get_char(port, &sr, &last_res); + c = stm32_get_char(port, &sr, &stm32_port->last_res); flag = TTY_NORMAL; port->icount.rx++; @@ -808,6 +807,7 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) stm32_ports[id].port.line = id; stm32_ports[id].fifoen = true; stm32_ports[id].rx_irq = USART_CR1_RXNEIE; + stm32_ports[id].last_res = RX_BUF_L; return &stm32_ports[id]; } diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index f9fe15b..056a837 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -226,6 +226,7 @@ struct stm32_port { dma_addr_t tx_dma_buf; /* dma tx buffer bus address */ unsigned char *tx_buf; /* dma tx buffer cpu address */ u32 rx_irq; /* USART_CR1_RXNEIE or RTOIE */ + int last_res; bool tx_dma_busy; /* dma tx busy */ bool hw_flow_control; bool fifoen; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html