From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Several drivers have the same device tree parsing code. Create
a common helper function for it.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/Kconfig | 4 ++++
drivers/tty/serial/Makefile | 2 ++
drivers/tty/serial/of.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 12 ++++++++++++
4 files changed, 63 insertions(+)
create mode 100644 drivers/tty/serial/of.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5c8850f7a2a0..8baef5b95bed 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -14,6 +14,10 @@ config SERIAL_EARLYCON
the console before standard serial driver is probed. The console is
enabled when early_param is processed.
+config OF_SERIAL
+ depends on SERIAL_CORE
+ def_bool y
+
source "drivers/tty/serial/8250/Kconfig"
comment "Non-8250 serial port support"
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 53c03e005132..0fee8f4e36cb 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+obj-$(CONFIG_OF_SERIAL) += of.o
+
# These Sparc drivers have to appear before others such as 8250
# which share ttySx minor node space. Otherwise console device
# names change and other unplesantries.
diff --git a/drivers/tty/serial/of.c b/drivers/tty/serial/of.c
new file mode 100644
index 000000000000..660a8cb09b44
--- /dev/null
+++ b/drivers/tty/serial/of.c
@@ -0,0 +1,45 @@
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/serial_core.h>
+
+/**
+ * of_get_rs485_mode() - Implement parsing rs485 properties
+ * @np: uart node
+ * @rs485conf: output parameter
+ *
+ * This function implements the device tree binding described in
+ * Documentation/devicetree/bindings/serial/rs485.txt.
+ *
+ * Return: 0 on success, 1 if the node doesn't contain rs485 stuff, or a
+ * negative error code.
+ */
+int of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
+{
+ u32 rs485_delay[2];
+ int ret;
+
+ ret = of_property_read_u32_array(np, "rs485-rts-delay" rs485_delay, 2);
+ if (ret == -EINVAL) /* property does not exist */
+ return 1;
+ if (ret) /* property does not have a value or is smaller than two u32 */
+ return ret;
+
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+
+ /*
+ * clear full-duplex and enabled flags to get to a defined state with
+ * the two following properties.
+ */
+ rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED);
+
+ if (of_property_read_bool(np, "rs485-rx-during-tx"))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
+ rs485conf->flags |= SER_RS485_ENABLED;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_rs485_mode);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 64d892f1e5cd..9a6055191d22 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -500,4 +500,16 @@ static inline int uart_handle_break(struct uart_port *port)
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
+/*
+ * Common device tree parsing helpers
+ */
+#ifdef CONFIG_OF_SERIAL
+void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf);
+#else
+static inline void of_get_rs485_mode(struct device_node *np,
+ struct serial_rs485 *rs485conf)
+{
+}
+#endif
+
#endif /* LINUX_SERIAL_CORE_H */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
