DMA RX completion handler for UART is called from a tasklet and hence
may be delayed depending on the system load. In meanwhile, there may be
RX timeout interrupt which can get serviced first before DMA RX
completion handler is executed for the completed transfer.
omap_8250_rx_dma_flush() which is called on RX timeout interrupt makes
sure that the DMA RX buffer is pushed and then the FIFO is drained and
also queues a new DMA request. But, when DMA RX completion handler
executes, it will erroneously flush the currently queued DMA transfer
which sometimes results in data corruption and double queueing of DMA RX
requests.
Fix this by checking whether RX completion is for the currently queued
transfer or not. And also hold port lock when in DMA completion to avoid
race wrt RX timeout handler preempting it.
Signed-off-by: Vignesh R <vigneshr@xxxxxx>
---
v2: use dmaengine_tx_status() API to know completion status.
drivers/tty/serial/8250/8250_omap.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index d81bac98d190..833771bca0a5 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -786,8 +786,27 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
static void __dma_rx_complete(void *param)
{
- __dma_rx_do_complete(param);
- omap_8250_rx_dma(param);
+ struct uart_8250_port *p = param;
+ struct uart_8250_dma *dma = p->dma;
+ struct dma_tx_state state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->port.lock, flags);
+
+ /*
+ * If the tx status is not DMA_COMPLETE, then this is a delayed
+ * completion callback. A previous RX timeout flush would have
+ * already pushed the data, so exit.
+ */
+ if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) !=
+ DMA_COMPLETE) {
+ spin_unlock_irqrestore(&p->port.lock, flags);
+ return;
+ }
+ __dma_rx_do_complete(p);
+ omap_8250_rx_dma(p);
+
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
