Use standard port->iotype to distinguish endian difference. Note as we
read/write register by checking iotype dynamically, we need to initialize
the iotype correctly for earlycon as well to avoid a break.
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxxx> (supporter:TTY LAYER)
Cc: Stefan Agner <stefan@xxxxxxxx>
Cc: Mingkai Hu <Mingkai.Hu@xxxxxxx>
Cc: Yangbo Lu <yangbo.lu@xxxxxxx>
Cc: Fugang Duan <fugang.duan@xxxxxxx>
Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
ChangeLog:
v2->v3:
* Instead of using global var, use standard port->iotype to distinguish
endian difference.
v1->v2:
* No changes
---
drivers/tty/serial/fsl_lpuart.c | 43 +++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index ed9db2f..bbf47a0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -280,15 +280,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);
-static inline u32 lpuart32_read(struct uart_port *port, u32 reg_off)
-{
- return ioread32be(port->membase + reg_off);
+static inline u32 lpuart32_read(struct uart_port *port, u32 off)
+{
+ switch (port->iotype) {
+ case UPIO_MEM32:
+ return readl(port->membase + off);
+ case UPIO_MEM32BE:
+ return ioread32be(port->membase + off);
+ default:
+ return 0;
+ };
}
static inline void lpuart32_write(struct uart_port *port, u32 val,
- u32 reg_off)
+ u32 off)
{
- iowrite32be(val, port->membase + reg_off);
+ switch (port->iotype) {
+ case UPIO_MEM32:
+ writel(val, port->membase + off);
+ break;
+ case UPIO_MEM32BE:
+ iowrite32be(val, port->membase + off);
+ break;
+ };
}
static void lpuart_stop_tx(struct uart_port *port)
@@ -602,7 +616,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
spin_lock_irqsave(&sport->port.lock, flags);
if (sport->port.x_char) {
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
else
writeb(sport->port.x_char, sport->port.membase + UARTDR);
@@ -610,14 +624,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_stop_tx(&sport->port);
else
lpuart_stop_tx(&sport->port);
goto out;
}
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_transmit_buffer(sport);
else
lpuart_transmit_buffer(sport);
@@ -1890,12 +1904,12 @@ static int __init lpuart_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_console_get_options(sport, &baud, &parity, &bits);
else
lpuart_console_get_options(sport, &baud, &parity, &bits);
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_setup_watermark(sport);
else
lpuart_setup_watermark(sport);
@@ -1954,6 +1968,7 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
+ device->port.iotype = UPIO_MEM32BE;
device->con->write = lpuart32_early_write;
return 0;
}
@@ -2015,7 +2030,7 @@ static int lpuart_probe(struct platform_device *pdev)
}
sport->port.irq = ret;
sport->port.iotype = sdata->iotype;
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
@@ -2042,7 +2057,7 @@ static int lpuart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &sport->port);
- if (sport->port.iotype & UPIO_MEM32BE)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart_reg.cons = LPUART32_CONSOLE;
else
lpuart_reg.cons = LPUART_CONSOLE;
@@ -2095,7 +2110,7 @@ static int lpuart_suspend(struct device *dev)
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
- if (sport->port.iotype & UPIO_MEM32BE) {
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
/* disable Rx/Tx and interrupts */
temp = lpuart32_read(&sport->port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
@@ -2146,7 +2161,7 @@ static int lpuart_resume(struct device *dev)
if (sport->port.suspended && !sport->port.irq_wake)
clk_prepare_enable(sport->clk);
- if (sport->port.iotype & UPIO_MEM32BE) {
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(&sport->port, UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
