Switch to the stable UART bindings by adding a XTAL node and using the
proper compatible strings.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index b0fc91f..a334fbe 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -70,9 +70,37 @@
};
};
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
clk81: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
}; /* end of / */
+
+
+&uart_AO {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
