The AUX/mini-UART in the BCM2835 family of procesors is a cut-down 8250 clone. In particular it is lacking support for the following features: CSTOPB PARENB PARODD CMSPAR CS5 CS6 Add a new capability (UART_CAP_MINI) that exposes the restrictions to the user of the termios API by turning off the unsupported features in the request. N.B. It is almost possible to automatically discover the missing features by reading back the LCR register, but the CSIZE bits don't cooperate (contrary to the documentation, both bits are significant, but CS5 and CS6 are mapped to CS7) and the code is much longer. See: https://github.com/raspberrypi/linux/issues/1561 Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250.h | 3 +++ drivers/tty/serial/8250/8250_bcm2835aux.c | 2 +- drivers/tty/serial/8250/8250_port.c | 6 ++++++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ce8d4ff..b2bdc35 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -81,6 +81,9 @@ struct serial8250_config { #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: + * STOP PARITY EPAR SPAR WLEN5 WLEN6 + */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index e10f124..a23c7da 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ spin_lock_init(&data->uart.port.lock); - data->uart.capabilities = UART_CAP_FIFO; + data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI; data->uart.port.dev = &pdev->dev; data->uart.port.regshift = 2; data->uart.port.type = PORT_16550; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 09a65a3..dd218a1 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2584,6 +2584,12 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, unsigned long flags; unsigned int baud, quot, frac = 0; + if (up->capabilities & UART_CAP_MINI) { + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); + if ((termios->c_cflag & CSIZE) == CS5 || + (termios->c_cflag & CSIZE) == CS6) + termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; + } cval = serial8250_compute_lcr(up, termios->c_cflag); baud = serial8250_get_baud_rate(port, termios, old); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
