On Wed, 01 Feb 2017, Lee Jones wrote:
> When hardware flow-control is disabled, manual toggling of the UART's
> reset line (RTS) using userland applications (e.g. stty) is not
> possible, since the ASC IP does not provide this functionality in the
> same was as some other IPs do. Thus, we have to do this manually.
> This patch configures the UART RTS line as a GPIO for manipulation
> within the UART driver when HW flow-control is not enabled.
>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/stih410-b2260.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index 06b0696..fa16aba 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -63,6 +63,7 @@
> uart0: serial@9830000 {
> label = "LS-UART0";
> status = "okay";
> + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
> };
>
> /* Low speed expansion connector */
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
