On Wed, 01 Feb 2017, Lee Jones wrote:
> There are now 2 possible separate/different Pinctrl states which can
> be provided from platform data. One which encompasses the lines
> required for HW flow-control (CTS/RTS) and another which does not
> specify these lines, such that they can be used via GPIO mechanisms
> for manually toggling (i.e. from a request by `stty`).
>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> drivers/tty/serial/st-asc.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
> index 397df50..1058020 100644
> --- a/drivers/tty/serial/st-asc.c
> +++ b/drivers/tty/serial/st-asc.c
> @@ -18,6 +18,7 @@
> #include <linux/serial.h>
> #include <linux/console.h>
> #include <linux/sysrq.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/io.h>
> #include <linux/irq.h>
> @@ -37,10 +38,16 @@
> #define ASC_FIFO_SIZE 16
> #define ASC_MAX_PORTS 8
>
> +/* Pinctrl states */
> +#define DEFAULT 0
> +#define NO_HW_FLOWCTRL 1
> +
> struct asc_port {
> struct uart_port port;
> struct gpio_desc *rts;
> struct clk *clk;
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *states[2];
> unsigned int hw_flow_control:1;
> unsigned int force_m1:1;
> };
> @@ -694,6 +701,7 @@ static int asc_init_port(struct asc_port *ascport,
> {
> struct uart_port *port = &ascport->port;
> struct resource *res;
> + int ret;
>
> port->iotype = UPIO_MEM;
> port->flags = UPF_BOOT_AUTOCONF;
> @@ -720,6 +728,27 @@ static int asc_init_port(struct asc_port *ascport,
> WARN_ON(ascport->port.uartclk == 0);
> clk_disable_unprepare(ascport->clk);
>
> + ascport->pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (IS_ERR(ascport->pinctrl)) {
> + ret = PTR_ERR(ascport->pinctrl);
> + dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret);
> + }
> +
> + ascport->states[DEFAULT] =
> + pinctrl_lookup_state(ascport->pinctrl, "default");
> + if (IS_ERR(ascport->states[DEFAULT])) {
> + ret = PTR_ERR(ascport->states[DEFAULT]);
> + dev_err(&pdev->dev,
> + "Failed to look up Pinctrl state 'default': %d\n", ret);
> + return ret;
> + }
> +
> + /* "no-hw-flowctrl" state is optional */
> + ascport->states[NO_HW_FLOWCTRL] =
> + pinctrl_lookup_state(ascport->pinctrl, "no-hw-flowctrl");
> + if (IS_ERR(ascport->states[NO_HW_FLOWCTRL]))
> + ascport->states[NO_HW_FLOWCTRL] = NULL;
> +
> return 0;
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
