Defines the bits controlling FIFO thresholds, adds the additional
HSCIF registers to the register map.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/tty/serial/sh-sci.c | 2 ++
drivers/tty/serial/sh-sci.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index db5de80..3a9c001 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -377,6 +377,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCPDR] = sci_reg_invalid,
[SCDL] = { 0x30, 16 },
[SCCKS] = { 0x34, 16 },
+ [HSRTRGR] = { 0x54, 16 },
+ [HSTTRGR] = { 0x58, 16 },
},
/*
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index ffa6d68..2c45e79 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -29,6 +29,8 @@ enum {
SCPDR, /* Serial Port Data Register */
SCDL, /* BRG Frequency Division Register */
SCCKS, /* BRG Clock Select Register */
+ HSRTRGR, /* Rx FIFO Data Count Trigger Register */
+ HSTTRGR, /* Tx FIFO Data Count Trigger Register */
SCIx_NR_REGS,
};
@@ -99,6 +101,10 @@ enum {
#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
/* SCFCR (FIFO Control Register) */
+#define SCFCR_RTRG1 BIT(7) /* Receive FIFO Data Count Trigger */
+#define SCFCR_RTRG0 BIT(6)
+#define SCFCR_TTRG1 BIT(5) /* Transmit FIFO Data Count Trigger */
+#define SCFCR_TTRG0 BIT(4)
#define SCFCR_MCE BIT(3) /* Modem Control Enable */
#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */
#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
